2016 Yeti SB5 Large, custom, carbon wheels, xtras

2016 Yeti SB5 carbon frame (Turq level, before there was multiple frame material levels), size Large
Custom build with carbon wheels, many upgrades, and some extras / spares.
This thing was used as intended and has seen some action, but also has had regular maintenance and still rides great.

Frame:
Front triangle of frameset was replaced in 2017 by Yeti due to a defect (crack in top tube)
Spare (black, carbon) rear triangle because I thought i cracked it in crash in 2017, but it has been fine since so I have a spare black (like new) rear triangle to include in case you crash and break it.
Frame has a fair number of paint chips and some sealant and dust that has worked its way into the paint, might buff out but I’ve never tried. Not a garage queen but still rips. I may regret selling it as I’m skeptical of the new new school geometries, but I’m gonna break the bank and buy something new probably.

Suspension:
Rear shock is an upgraded Fox Float X2 with remote 3-position (climb, trail, full open) operated from bars on right side above shifter. Have the original stock shock to include, which was barely ridden.
Fork is a Rockshox Pike RCT3 @ 150mm. I have multiple rebuild parts to include for the Pike. There are some scratches on the upper stanchions but nothing that is affecting performance or fork seals as far as I can tell.
Suspension (front and rear) was serviced / rebuilt Fall 2019 by Over the Edge in Fruita and has only seen a handful of rides since, should have done that sooner, suspension feels great again.


Build:
Reynolds Carbon Wheelset (27.5) with DT350 hubs and 54T star ratchet upgrade, new in 2018 with my wife’s SB5
Sram Reverb 150mm dopper post, left side below the bar mount, with a spare actuation lever (hydraulic). This is my second lever, as first one failed, hence the new spare to include if you have same problem).
RaceFace Turbine 170mm crankset and Race Face PF bottom bracket
BeyondBlack oval chainring 30T
Shimano XT 11-42 cassette, 11-speed
Shimano XT brakes And pads
Shimano XT rotors (180 front, 160 rear)
Tires: Maxxis High Roller II 2.4 front and Ardent 2.4 in the rear, used but decent life left, setup tubeless with Stan’s. I have a barely used Maxxis Ikon tire to include with it.
Sram GX 11-speed rear derailleur
Sram X01 shifter 11-speed
Renthal FatBar carbon lite cut to 760mm I think
Newish ODI lock-on grips
Renthal Apex stem ~50mm?

Pretty dang light build that goes uphill quickly, but can still handle anything I’ve been brave enough to throw it both in terms of tech, drops, and/or high speed handling

Lemme know what I forgot and what questions you have! Located not far from the roundabout in Redlands, could meet at Lunch Loops easily.

Asking $1850 OBO... all reasonable offers considered!