2019 Velo Orange Cigne Stem
Category: Stems
Condition: Excellent - Lightly Ridden
Condition: Excellent - Lightly Ridden
Original Post Date: Jul-11-2020 10:50:56
Last Repost Date: Jul-11-2020 10:50:56
Still For Sale: Sold
View Count: 157
Watch Count: 0
Last Repost Date: Jul-11-2020 10:50:56
Still For Sale: Sold
View Count: 157
Watch Count: 0
Velo Orange Cigne Stem
Handlebar Clamp: 31.8mm
Steerer Clamp: 1-1/8"
Height: 145mm (base to center of clamp)
Weight: 343g
The Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. Available in High Polish, Nickel, and Noir.
The Cigne functions as both your stem and top cap. Your star-nut should be approximately 1cm from the top of your steerer tube and you need at least 55mm of tube (metal only, not for use with carbon steerers). Now slide your stem on the steerer, slip in the long bolt with the washer, pretension with the long bolt, and clamp it down at the base. Use grease as needed.
9/10 Condition
Call/Text
$50
Covid-19 precautions for viewing: please come prepared with a face mask. Venmo/Paypal is preferred over cash.
Handlebar Clamp: 31.8mm
Steerer Clamp: 1-1/8"
Height: 145mm (base to center of clamp)
Weight: 343g
The Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. Available in High Polish, Nickel, and Noir.
The Cigne functions as both your stem and top cap. Your star-nut should be approximately 1cm from the top of your steerer tube and you need at least 55mm of tube (metal only, not for use with carbon steerers). Now slide your stem on the steerer, slip in the long bolt with the washer, pretension with the long bolt, and clamp it down at the base. Use grease as needed.
9/10 Condition
Call/Text
$50
Covid-19 precautions for viewing: please come prepared with a face mask. Venmo/Paypal is preferred over cash.
Warning: This listing is out of date. You must Edit this item before you can repost!"
$50 USD
Restrictions: Reasonable offers only, No Trades, Will ship within country only
San Diego, United States Related Listings
|
|
|
|
|
|
|
|