moose-619 danielsapp's article
Aug 4, 2020 at 14:122 days
Kona Announces New Process X & Aluminum 153
It's a Patrol lol
Jul 20, 2020 at 22:10Jul 20, 2020
Maxxis Minion DHF 27.5x2.3" Skinwall 3C/EXO/TR Pair This 2.3-inch wide Minion may have "DH" in its nomenclature, but it's more than happy to serve you as an all-mountain or enduro tire. The DHF pattern incorporates ramped knobs to promote low-rolling resistance with channel-cut side knobs in order to increase cornering grip. Complementing this is Maxxis' 3C Maxx Terra, a triple compound design that focuses on versatility over maximum grip and lowest rolling-resistance. This provides the balance that all-mountain riders need to tackle everything from high alpine to loamy forest floors. Adding to this tire's versatility, while also reinforcing its lighter casing, is Maxxis' EXO sidewall protection. This helps resist abrasion and pinched sidewalls out on the trail. 8.5/10 Condition Call, Text, E-Mail $60 Covid-19 precautions for viewing: please come prepared with a face mask. Venmo/Paypal is preferred over cash
Jul 11, 2020 at 22:58Jul 11, 2020
SRAM GX 11-speed Trigger Shifter X-Horizon Rear Derailleur - Long Cage 8.5/10 Condition Call/Text $80 Covid-19 precautions for viewing: please come prepared with a face mask. Venmo/Paypal is preferred over cash.
Jul 11, 2020 at 22:56Jul 11, 2020
Shimano SLX Hydraulic Brake Set New Pads Front Hose Length: 790mm Rear Hose Length: 1450mm 9/10 Condition Call/Text $120 Covid-19 precautions for viewing: please come prepared with a face mask. Venmo/Paypal is preferred over cash.
Jul 11, 2020 at 22:53Jul 11, 2020
Jul 11, 2020 at 22:50Jul 11, 2020
Velo Orange Cigne Stem Handlebar Clamp: 31.8mm Steerer Clamp: 1-1/8" Height: 145mm (base to center of clamp) Weight: 343g The Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. Available in High Polish, Nickel, and Noir. The Cigne functions as both your stem and top cap. Your star-nut should be approximately 1cm from the top of your steerer tube and you need at least 55mm of tube (metal only, not for use with carbon steerers). Now slide your stem on the steerer, slip in the long bolt with the washer, pretension with the long bolt, and clamp it down at the base. Use grease as needed. 9/10 Condition Call/Text $50 Covid-19 precautions for viewing: please come prepared with a face mask. Venmo/Paypal is preferred over cash.
Jul 11, 2020 at 22:46Jul 11, 2020
Paul Components Brake Set - Silver Love Levers Motolite Linear Pull Calipers These levers are machined to exacting specifications. The pivot features a dual sealed cartridge bearing for the smoothest, stiffest brake lever you will ever use. These will be serviceable for a lifetime. A 5mm set screw in the side of the lever perch allows you to adjust the reach, setting the distance from the bar to the lever to fit your hands. Barrel adjusters are included for fine-tuning your brakes and their oversized design and smooth shape makes it easy to adjust them by hand. All Motolite’s have the capability of running a larger size wheel. In other words, the arms allow the pads to travel way up the arm so you could say, run a 650b or 700c wheel on a bike designed for 26”wheels. This brake is 100% machined in-house, from 6061 Aluminum. These feature over-sized sealed pivot sleeves machined to a tolerance of plus or minus one thousandths of an inch and independently adjustable square wire springs to keep everything snappy and balanced. The quick release mechanism is super simple and always reliable. 9/10 Condition Call/Text $225 Covid-19 precautions for viewing: Please come prepared with a face mask. Venmo/Paypal is preferred over cash.
Jul 11, 2020 at 22:42Jul 11, 2020
Crust Bikes Clydesdale Cargo Fork 1 1/8" threadless steerer with 7 3/4" of steer-tube Accepts a 20” wheel. Clears a 2.2 tire no problem. There are mounting points on the platform for bolting a carrier in. The fork accepts both v-brake and disc brake options. There are two main measurements which will determine if this is going to work for you: The Head Tube Angle, and the Axle-Crown Length. To be most versatile, The Cargo Fork was designed to replace a fork with an axle-crown measurement of 400mm or 15 ¾”, which is really common measurement, which you’ll find on a lot of touring, cyclocross, and stout steel old-school rigid mountain bike frames. 9/10 Condition Call/Text $225 Covid-19 precautions for viewing: Please come prepared with a face mask Venmo/Paypal is preferred over cash.
Added 3 photos to Buysell
Jun 17, 2020 at 21:58Jun 17, 2020
Jun 17, 2020 at 21:58Jun 17, 2020
2020 Stans Flow MK3 Wheelset Neo Hubs Boost spacing front and rear Comes with both HG freehub body and SRAM XD Driver True with no dents or dings 9/10 Condition Call, Text, E-Mail $400 Covid-19 Guidelines For Viewing: Please Come Prepared With Clean Gloves And A Face Mask Taking Payment Through Venmo or Paypal Only, So As Not To Handle Cash During This Pandemic.
Video by camerondodd98
Short, Sweet & Totally Analogue - Video
22 Mar 2018