2017 Foundry Flyover - custom one of a kind build

This is one unique build! Foundry Cycles Flyover, cyclocross intended but more than capable as a gravel or touring bike. Beautiful titanium, half brushed naked, half painted frame. Foundry is a now closed company out of Minneapolis . I purchased this used in late 2019 from a pro cross racer in Seattle. Then stripped it down to the frame and fork, and rebuilt completely custom at Broad Street Cycles with full GRX and Chris King components. Used myself for ~2500km, mostly gravel, and now it just sits too often between my road bike and another gravel one. Never crashed, and still in excellent condition, and shows it - titanium really does wear well. Minor cosmetic only nicks on components, as expected. Very responsive, stiff, but with that lovely forgiveness of a ti frame. Frame sizing is categorized by Foundry as a 'Small', with an effective top tube of 545mm. Basically it's akin to a 54cm frame. I'm 5'11" with 32" inseam and it fits me fine, though I wouldn't go any smaller, and like feeling like I'm more 'over' a bike versus 'in' it. It would work well for anyone ~ 5'7" - 5'11". See below for size chart.

I put a lot into building this up top quality, with some rare parts such as the discontinued matte punch colour Chris King headset and BB, and I want it to go to an equally appreciative new home. If serious, send me a message! Thanks for looking.

Specs:

FRAME - Foundry Flyover, size S, 3Al/2.5V titanium; double-butted down/toptubes; triple-butted seat tube; tapered seat/chainstays
FORK - Whisky #9 1.125–1.5" Tapered CX w/ fender mounts (100 x 15mm), custom painted to perfectly match frame
GROUPSET - Full Shimano GRX 810 mechanical hydraulic 11 spd
CHAINSET - GRX 812 48-31T 170mm
CHAIN - Durace 11 spd (less than 200km on it)
CASSETTE - HG 800 11-34
BRAKES - GRX 810 Hydraulic, Ultegra callipers, Shimano RT68 Icetech 160mm (front and rear) rotors
REAR DERAILLEUR - GRX 810 Shadow RD+ - 34T max low sprocket
FRONT DERAILLEUR - GRX 810 2x11 spd
WHEELS - Light Bicycle rims custom build in 2020 by Broad Street Cycles, 700c, tubeless compatible, 28h front and rear, 35 mm depth, 25 mm internal width, Sapin CX-Ray bladed spokes. These things are built to withstand anything.
HUBS - Chris King, 15x100mm front, 12x142mm rear, black
TIRES - René Herse Steliacoom 38mm, standard casing, tan (almost new, only ~ 100km on them), currently set up tubeless
HEADSET - Chris King 44mm, matte punch colour
BOTTOM BRACKET - Chris King Thread fit 24 mm, matte punch colour (English threaded)
HANDLE BAR - Shimano Pro Vibe Compact, AL-7075 alloy, 42cm
BARTAPE - Burgh, matte black
STEM - Shimano Pro Vibe, AL-7075 alloy, +/- 10 degrees, 80mm (OR 90mm and 100mm of same stem that can exchange, your choice)
SEATPOST - Shimano Pro Vibe, AL-7075 alloy, 31.6mm, 0mm offset (OR 25mm offset that can exchange, your choice)
SEATPOST CLAMP - Phil Wood, matte pink (to match with the Chris King, of course)
SADDLE - Specialized Power Pro, 143mm width, chromoly rails (OR Specialized Phenom 143mm width chromoly, your choice)

* includes titanium bottle cages as pictured, but no pedals

Other info:

Flyover Framesheet - https://www.retiredbrandresources.com/assets/specifications/16435_FND_Flyover_Framesheet_V6.pdf
Flyover size chart (Geometry Bike Geeks) - https://geometrygeeks.bike/bike/foundry-flyover-2017
Velonews frame review - https://www.velonews.com/gear/gravel-gear/foundry-flyover/