2022 Stumpjumper Pro-Level Custom S3 - XT, Reynolds Carbon

This newest Stumpjumper design rides amazing and is the perfect blend of squish and speed. I built this S3 up over the winter with a parts spec that is closest to the factory Pro build IMO, and realized after a couple short rides that I really need an S4. It's the awesome Satin Copper color that you can only get as a frameset, but with a Fox Factory DPS shock instead of the Performance Elite that usually comes with the frame. Built up with new (20mi) takeoff parts or parts with less than a season of use - see below for notes on what's takeoff. Everything is in like new condition other than the marks shown on the frame. I have a few spare parts I could swap in / out depending on how you want to go with the build; all noted below. Let me know what you’re interested in and i can figure out a cost. I've taken closeups of the few areas of the frame with minor marks, but overall it's in very good condition. PayPal fees and shipping costs not included. Thanks for checking it out, reach out with any questions!

FRAMESET
FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, flip chip Head Tube/Bottom Bracket adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 130mm of travel

Optional - Mullet Link

SUSPENSION
Rear Shock
FOX FLOAT DPS Factory, Rx Trail Tune, EVOL Air sleeve, Kashima Coat, 3-position adjustment w/ Open Mode Adjustment, 190x45mm

Optional - Cane Creek DB Air IL (~150 mi)

Fork
2021 FOX FLOAT 34 Factory, GRIP2 damper, Kashima Coating, 15x110mm, 44mm offset, 140mm of travel

Optional - Fox 36 Performance Elite 150mm Grip2

COCKPIT
Stem
Raceface Aeffect 35mm x 50mm (Takeoff)

Handlebars
Yeti Carbon 760mm (Takeoff)

Grips
ODI Lock On, Rogue, Black

Saddle
WTB Volt, Cromo Rails, 142mm (Takeoff)

SeatPost
OneUp Dropper 180mm + Wolf Tooth Lever

BRAKES
Front Brake
Shimano XT-M8100 2-piston caliper, hydraulic disc, 180mm

Optional - Shimano SLX M7120 - 4-piston caliper (Takeoff)

Rear Brake
Shimano XT-M8100 2-piston caliper, hydraulic disc, 180mm

Optional - Shimano SLX M7120 - 4-piston caliper (Takeoff)

DRIVETRAIN
Rear Derailleur
Shimano XT M8100 SGS 12-Speed (Takeoff)

Shift Lever
Shimano XT M8100 12-Speed

Cassette
Shimano SLX M7100 10-51t (Takeoff)

Chain
Shimano CN-M7100 12-Speed (Takeoff)

Crankset
Race Face Ride 32T (Takeoff)

Bottom Bracket
Shimano XT M8100

WHEELS
Reynolds Blacklabel 309/289r Carbon Limited Edition, 30mm inner width front, 28mm inner width rear, hookless, tubeless

Front Hub
Super Bubba X, sealed cartridge bearings, 15x110mm spacing, 24h

Rear Hub
Super Bubba X, 4 degree engagement, Microspline body, 12mm thru-axle, 148mm spacing, 28h (SRAM XD driver included)

Spokes
Sapim CX-Ray

Front Tire
Maxxis Dissector 29" x 2.4", 3C Maxx Terra Exo+

Rear Tire
Maxxis Rekon 29" x 2.4", 3C Maxx Terra Exo+