1979 Trek 710 56cm w/ modern build

Wonderful Trek made in the Waterford Wisconsin "barn" (1st location of Trek made products).
I am the 2nd owner and when I received it the paint was very ratty so the re-furb project was born.
I remember seeing this in CycleWorks in Ashland Or when I was 15 and this was always on my wish list - wonderful craftmanship and rides beautifully ( and a 56cm! usually you see this things on the waybig/small end).
Is this a cheap ass repaint scam? No, I stand by my work and have many friends in the cycling community (been in the shop/AM/OE scene since 88).
Stripped, electrostatically cleaned/sealed then powder coated @ Eastside Plating in Portland.
Deep blue w/ clear/light sparkle clear coat. New decals from VeloCals. It really gleams in the sun shine.

This is a 710 so that means the sports geometry (longer chain stays) and the Reynolds 531 tube set (silver brazing - much nicer than brass).
I did have it built up w/ the original Shimano Deore touring kit (w/ dyna drive pedals!) and if that is more your jam then that's just a swap away from happening. Old controls are cool but wanted to have it w/ STI shifters, modern gearing and dual pivot brakes for safety.

Catalog:
http://vintage-trek.com/images/trek/Trek79.pdf

Build:
Tange Levin sealed 1" threaded headset (new)
Nitto Technomic 10cm stem (new)
Soma compact 42cm (new)
Enve bar wrap (new)
Shimano 10 speed 105 STI shifters (new)
Lezyne bell (new)
Shimano cable stop (not so new, but clean)
Shimano Ultegra bottom bracket (new)
Shimano 105 110mm bcd asym cranks w/ 46/34 rings (new)
Shimano 105 chain (new)
Shimano HG-500 11/32 cassette (new)
Shimano 28.6 10 speed 105 frt derail (new)
Shimano 105 GS 10 speed rear derail (new)
Shimano 105 wheelset (near new)
Shimano 105 mid reach brakes (plenty of room for 32mm and fenders)
Specialized 32mm tires and tubes (new)
Campagnolo 27.2 seatpost
Brooks B-17S Professional saddle (have many others)
cables/housing (new)
Planet Bike fenders w/ Seattle made flaps from 20/20 Cycles
Zefal HPX pump
American Classic bottle cage

If you have any questions - fire away.
For sure the buyer will want to take it for a good test ride so totally game for that action if in the Seattle area.
Some buyers will be interested in Frek(ing) it to 650b and have wheels (42mm tires) to pop on to check clearances.

https://www.renehersecycles.com/what-we-ride-part-3-steves-frek/

Serious only, no weirdness and $ or Venmo only.
Buyer pays for shipping if that applies.
Ride safely!