2021 REEB Redikyelous w/ sliding dropouts/split stays

I hate to selling this frame, but sadly due to various issues, hardtail life isn't something my body can tolerate any longer.

I bought this frame to run Gates belt drive, hence the split stay and Paragon sliding dropouts. The frame is made in the US by REEB and I'm the original owner. I will include dropouts to run the bike SS or geared, as I have both. 29 in front and rear. Inside of the frame is treated with a frameguard. Headset is a Cane Creek 110.

Geometry is available here: https://geometrygeeks.bike/bike/reeb-redikyelous-2022/

You'll notice dirt on the frame. I am careful about not heavily washing steel frames unless required to avoid water intrusion, so typically all I do is wipe it down with a rag. This protects the frame but does leave some dirt especially around areas where there was grease (e.g. BB). There is no rust on the frame that I'm aware of.

No dents, gouges, cracks, major rust spots, or other defects I'm aware of. Areas where cables would rub are covered with tape. There is some minor scuffing of the REEB stickers, otherwise in excellent cosmetic and structural condition.

I have some belt drive components including 104 BCD chainring adapters, chainrings/cogs, and two belts if you plan on running belt drive. I also have various other components I used on the bike (stem, fork, wheels, etc) that I can provide if needed.

BB is a Hellbender 70, I can swap it for a DUB BB if needed, both are in good shape. I won't ship without a BB as it protects the threads in transit.

Blacked out edges of the photos are my feet. I figured I'd spare you photos of my toes.