2021 DT SWISS 29 HX 1501 Hybrid on 240 hub, Rear wheel

I just removed this wheel from my eMountain bike. There's nothing wrong with it, I just decided to grab some carbon wheels instead. The 1501 has an internal width of 30mm. It weighs in at 1501 for the set, but weighs approx 4.5 lbs as shown in the photo. I am including the Shimano XT 203 rotor and eThirteen Grapler 2.5 enduro tire, both are obviously used, but still have plenty of life left in them. The rotor is 203mm and center lock, the spacing is boosted, or 148, the hub itself is a DT swiss 240 (c pics-really an amazing wheel). The 1501 Hybrid is a great wheel. It is taped and the tube less stem installed with relatively fresh stans fluid. The freehub is Microspline, so it fits the Shimano 12 speed cassettes. DT swiss can easily swap out to any free hub system you might need. You'll have to hunt that one down yourself as I am only selling this wheel as is. I will tell you I put 2000 miles on this wheel and can tell you it is both round and true. The bearings were NEVER run in water. No creeks or rainy days. So the ratchet free hub and axle bearings are as good as new. Being a professional bike mechanic, I can tell you I regularly serviced this wheel and can only comment about its well built toughness. It is well built because it seldom requires any truing maintenance. It is tough because it was well tensioned the first time. The only imperfection I can disclose is a small impact dent on just the drive side rim. You can't see it in the pictures, but I want you to know it's there, and has been there for 1950 flawless miles of my use. What you can see in the pictures are the normal use surface scratches on the rim and the dust on the hub.