2011 Specialized Enduro Expert EVO

This Bike is completely stock and riddin very little its a large but has a shorter stem. Cosmetic wear on swing arm and were the cable rubs. Haven't even had this bike for a year. I also have two different rear springs the stock one and then one for a lighter rider. GOOD BIKE SHREDS!!! (DOES NOT COME WITH LG1+ COMES STOCK) I also fixed were the seat post cable is zip tied to the frame.
FRAME
M5 alloy, fully manipulated frame w/ ORE TT/ DT, tapered and forged HT, ISCG mount, sealed cartridge bearing pivots, replaceable derailleur hanger, 160mm travel
REAR SHOCK
Fox DHX RC2, coil over w/piggy back, rebound and compression and bottom-out force adj., 8.5 x 2.125", S:450, M:500, L:550, XL:600, custom eyelet for Enduro
FORK
Fox 36 Van R, coil spring, tapered alloy steerer, reb and preload adj., 20mm thru-axle, 170mm
HEADSET
1-1/8 and 1.5" Threadless, Campy style upper with 1.5" lower, cartridge bearings
STEM
Specialized XC, 3D forged alloy, 4-bolt, 31.8mm clamp, adjustable rise
HANDLEBARS
Specialized Demo low-rise bar, 7050 alloy, 750mm wide, 8 degree backsweep, 6 degree up, 31.8mm
GRIPS
Specialized lock-on, S/M: Grappler, Other: Rocca
FRONT BRAKE
Custom Avid Elixir R CR SL, hydraulic disc, tool-less pad contact & reach adj., alloy backed semi-metallic pads, stainless hardware, 203mm rotor
REAR BRAKE
Custom Avid Elixir R CR SL, hydraulic disc, tool-less pad contact & reach adj., alloy backed semi-metallic pads, stainless hardware, 185mm rotor
BRAKE LEVERS
Custom Avid Elixir R CR SL, hydraulic disc, tool-less adj. reach and pad contact, alloy lever blade
FRONT DERAILLEUR
SRAM X.7, 10-speed, S1 direct mount for DMD, bottom pull
REAR DERAILLEUR
SRAM X.0, 10-speed, mid cage
SHIFT LEVERS
SRAM X.9, 10-speed, aluminum trigger
CASSETTE
Shimano HG81, 10-speed, 11-36t
CHAIN
KMC X10, 10-speed, w/ reuseable Missing Link, nickel plates
CRANKSET
Custom SRAM Carbon S-2200, 10-speed AM double, GXP spindle, removeable spider, Gamut Shift Guide, S: 170mm, others: 175mm
CHAINRINGS
36A x 24A, 4-bolt, 104/64mm
BOTTOM BRACKET
SRAM GXP, outboard bearing
PEDALS
Resin Test Ride Pedals with toe clips, CEN std.
RIMS
Roval Traverse AL, alloy disc, 26mm, 27/32h
FRONT HUB
Roval Traverse AL, alloy, 20mm thru-axle, 27h
REAR HUB
Roval Traverse AL, QR, 32h
SPOKES
DT Swiss Competition 1.8/1.6mm stainless