Powered by Outside

Hubs, give me help...

PB Forum :: Dirt Jumping & Street
Hubs, give me help...
  • Previous Page
Author Message
flag travis657
Posted: Apr 25, 2009 at 17:34 Quote
Well just recently i switched the frames on my bike, and when i put my back tire on my new frame, when i lift my bike up and drop it, the thing in the center of your rim, hub i think, anyways it moves, what do i do about this
flag fireman
Posted: Apr 25, 2009 at 17:35 Quote
Did you tighten it? Different spacing? What frame? What hub?
flag James116
Posted: Apr 25, 2009 at 17:36 Quote
need more information
Post some pictures of your setup.
flag travis657
Posted: Apr 25, 2009 at 17:38 Quote
i pushed the frame down on the things that come out and tightened it all thew way, and it went from a norco ryde to a velocycle lightning and im not sure what hub it is
flag James116
Posted: Apr 25, 2009 at 17:40 Quote
Can you post pics?
flag demonbiker48
Posted: Apr 25, 2009 at 17:41 Quote
i know you dont know the names but it doesnt make sense when you say i pushed on those things and the thing moved and i tightened the thing... sorry just post pics or somethign
flag ICAS
Posted: Apr 25, 2009 at 17:42 Quote
On the front or back? or both? I'm guessing the back unless you swapped forks also.

It sounds like you may have a spacing issue in the rear. Is it 135mm rear frame?
flag travis657
Posted: Apr 25, 2009 at 17:46 Quote
here are some pics, and what i was talking about were the arms on the back i pushed on those, and its th rear
flag travis657
Posted: Apr 25, 2009 at 18:04 Quote
photo

3324773

photo

3324769

photo

3324761

photo

3324765
flag travis657
Posted: Apr 25, 2009 at 18:05 Quote
sorry, i couldnt really get any good pics
flag leon-forfar
FL
Posted: Apr 25, 2009 at 18:34 Quote
undo the bolt take a pictur of the axle through the drop out so we can see if its the same size or not
flag lafalot
Posted: Apr 25, 2009 at 18:46 Quote
he needs to get some spanners and tighten up the cones which have to be snug with the bearings or else the hub moves around even if you tighten the axle - which he did.
flag
Posted: Apr 25, 2009 at 19:47 Quote
lafalot wrote:
he needs to get some spanners and tighten up the cones which have to be snug with the bearings or else the hub moves around even if you tighten the axle - which he did.

Bingo.
flag travis657
Posted: Apr 26, 2009 at 10:32 Quote
demo-9 wrote:
lafalot wrote:
he needs to get some spanners and tighten up the cones which have to be snug with the bearings or else the hub moves around even if you tighten the axle - which he did.

Bingo.
whats that mean?
  • Previous Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.012979
Mobile Version of Website