here my stp so far i have 07 transition revolution rims on the way got all the other parts sitting on my computer desk waiting to be put on when the rims come
so while cleaning my stp after trying some bar spin abubicas i found 2 cracks on my stp. one under the headtube beside the weld and the other on the seatstay at the top beside the weld.
RIP STP.
2211240
oh well getting it warrentied and moving on to my 3rd STP( first one stolen)
Cheers i have spent all my money on my glory but i have some left like £20++ but i dont know what to get i was think £10 spoke and then i can build up a new front wheel case i have everything i need r it apart from spoke an maybe a road cassette
When you rawed the frame did you find a coating on the aluminum under the paint (possibly primer)? because I started my frame and in parts the stripper went down to the aluminum but mostly there is this easily scratchable bad looking coating on it.
just got my stp, but i got 2 questions. 1: wat axle is the stp ss 2008, 10mm or 9mm? 2: i hav not cranks heads on my cranks bolts, so my bolt is flush. no, my cranks donot come loose. how do i get it out?
When you rawed the frame did you find a coating on the aluminum under the paint (possibly primer)? because I started my frame and in parts the stripper went down to the aluminum but mostly there is this easily scratchable bad looking coating on it.
I just used some super strong paint remover.(i like burn you skin if you get it on your skin)It took about five minutes to get the first coat of the stuff off i did it about five times until all the colour was gone. There may be a primer layer but on mine it is barely visible. I am going to get a can of clear coat and you use that a couple of times that should stop it getting scratched.
would a oddyssey linear cable be long enough for an stp running bb5 brakes?
they come pritty long and you cut them down to fit your size. so it should. check the winstanleys bmx website or maybe the odyssey site and see if its got the length. then measure yours. and see what difference there is.
hey, im an stp rider, and i just bought a new rear hub that's 9-11 teeth, what gear ration could i run at the front since i dont wanna use a chain tensioner because it's a real microdrive