tf tuned in the uk make custom mount hardware for shocks I had to get some for my bos void
OzMike wrote:
Hi folks! Recently got my hands on a 2014 Gambler - I'm after the shock mounting hardware so I can put a Cane Creek DB Air - I'm looking for the mount that is 60 mm x 8 mm. I've tried googling etc but doesn't seem to be much help. Any suggestions?
Hopefully my new DH build for this season granted I can get money.
2015 Scott Gambler 10 frameset X Fusion RV1 HLR Fork Mavic EX729 laced to Hope Pro 2 evo hubs in black Chromag BZA Carbon 35mm bar and stem from old bike Hope Tech V4's Braided Hoses Shimano Saint Cranks Shimano Zee Shifter Shimano Zee Rear Derailleur OneUp DH Block 7 Speed Conversion Fox DHX RC4 Rear Shock Chromag Overture Saddle Black Chromag Palmskin Grips Black Chromag Scarab Pedals Black Hope Retainer NW Ring Black Hope Slick Guide Shimano PF Saint BB
Any input would be much appreciated. Can't wait to get it built up in the near future.
hey guys. i have a 2009 dh20 gambler and ive just got a new fork with a tapered neck. id need the 1.5 head tube to use it so does anyone knows how can i get my hands on one of those things? thanks in advance!
Where can you get a full frame bearing set for the 2013/2014 model in the uk. Can't find anything for the new style frame Mines creaking time for a upgrade/replacement
Where can you get a full frame bearing set for the 2013/2014 model in the uk. Can't find anything for the new style frame Mines creaking time for a upgrade/replacement
Probably your best bet would be to contact your local scott dealership and get them to order them in for you, bit pricey but they'll be right.
undo top shock bolt, compress linkage so you can get hold of the shock, undo bottom bolt, remove shock, undo preload ring on shock, remove C collar, slide spring off, slide new one on, do in reverse