Need advice on building a Portable Mini Ramp for DJ Bike

PB Forum :: Dirt Jumping & Street
Need advice on building a Portable Mini Ramp for DJ Bike
  • Next Page
Author Message
flag TheBibbles
Posted: Feb 15, 2021 at 7:55 Quote
The best designed one I've seen that's home made and portable is this one:

Lunch Ride Folding Kicker

With the plans here:

Plans

You might need to shrink the dimensions down a touch to make it fit on your back or carry one handed but the design is excellent.
flag cmc4130
Posted: Nov 20, 2021 at 13:34 Quote
DaltonBourne wrote:
How to build bike ramps - I think this is a great approach to learning techniques and improving balance even when you are inside your house. To create a bike ramp, it's important to have three crossbars. You need a total of three vertical racks to create a good-quality cycling ramp. Then sketch a curve on one side to create the base of the bike path. You can use a jigsaw to cut a curve by tracing the sketch you made. For positions, you should find three points on the curve: the top, middle, and bottom. It will ensure that your bike's uphill platform is firm and doesn't come apart during use. «After you have built the foundation of your homemade bike ramp with the crossbars and vertical racks, proceed to cut the deck. For the floor of the bike ramp, cut the plywood into 24" wide and 26" long pieces.

Did you copy/paste this from somewhere?

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv56 0.018149
Mobile Version of Website