(I think it is a 2002) Hi all Background : I am a casual pleasure cyclist and it is not my hobby. I bought this bike off a work colleague over 12 years ago(I think).Trying to restore/update my bike as much as possible,as it has been in the shed for over 8 years.
On this particular occasion I need to replace both wheels as each has 2 or 3 broken spokes and the others look like they're ready to detach !!! I have a gallery of my bike's photos here : https://imgur.com/a/1z2UPg4 Wheel photos are last(click load more images)
Regarding the wheels : I am thinking of new wheel/tyres (or are the tyres good?) New cassette maybe(and Derailleurs ? ) Also wheels that are disc brake compatible ?
Thank you for your reply. I will look in to getting some spokes, but if I decide to buy wheels, what do I need to look for except diameter ? What size are these wheels ? (as in do they have a special number or are they in cm or Inches ?
The level of corrosion on that bike is going to make things challenging. I agree, for your riding style and frequency, you will likely be better served with new, budget hard tail. You will probably spend less or the same on a new bike, and it will ride much better IMO.
2nd hand 26" wheels of ebay, Front, 32 spoke, disc or rim depending, 100mm axle 9mm QR, Rear, 32 spoke, Disc or rim, depending, 135mm axle spacing QR along with some affordable disc brakes.
Reckon that swingarm with those two holes could accommodate a caliper mount of some descript, in theory I reckon disc brake could be run on the rear.
Would suggest a strip down and go over all parts, clean, oil, service etc, its gonna need a bit of time and effort, and some investment, keep costs lower 2nd parts will help. You will inevitably encounter the need for other parts as you go.
If you love it go for it and enjoy the journey, if its too much to handle or beyond your abilty, time effort money wise then perhaps look at something else and sell it.
Ask these guys, they may have more excitement regarding your bike. It's a 90's MTB enthusiast group but yours is not far off. There's people reviving older bikes all the time and it's generally pennies on the dollar compared to buying a truly modern machine.
2nd hand 26" wheels of ebay, Front, 32 spoke, disc or rim depending, 100mm axle 9mm QR, Rear, 32 spoke, Disc or rim, depending, 135mm axle spacing QR along with some affordable disc brakes.
Reckon that swingarm with those two holes could accommodate a caliper mount of some descript, in theory I reckon disc brake could be run on the rear.
Would suggest a strip down and go over all parts, clean, oil, service etc, its gonna need a bit of time and effort, and some investment, keep costs lower 2nd parts will help. You will inevitably encounter the need for other parts as you go.
If you love it go for it and enjoy the journey, if its too much to handle or beyond your abilty, time effort money wise then perhaps look at something else and sell it.
That disc mount standard isnt readily available. he is going to have to get one made.
Ask these guys, they may have more excitement regarding your bike. It's a 90's MTB enthusiast group but yours is not far off. There's people reviving older bikes all the time and it's generally pennies on the dollar compared to buying a truly modern machine.
Tires, tubes, wheels, cables, housing, caps, brake set .... are easily going to run in the 400$ range.
Assuming free labour... that still leaves you with the suspension to service. I would bet money that the headset and BB could also be replaced.
for 400$ I can buy a hard tail, with a fork that functions just as well and it will have all new components. including a fresh drive train.
Sure, if you are super nostaglic about the bike, or if you just want fun project.. I am all in. Personally I love making old bikes work, and there are loads of hack that will stretch the life something. That said, I have shed full of old parts and a fair bit of mechanical experience.
I am not tying to discourage the OP, but he needs to make an educated cost benefit analysis.
"That disc mount standard isnt readily available. he is going to have to get one made. "
If you have the love to want to do it, 6mm flat plate T6, files, 6mm plywood, hacksaw and a drill with bits, better with a 2000 watt 1/2" router and TCT Bearing Guided Trimmer bit.