will this all work out? new frame+fork and all old parts put together

PB Forum :: Bikes, Parts, and Gear
will this all work out? new frame+fork and all old parts put together
  • Previous Page
  • Next Page
Author Message
flag ryan4dh
Posted: Sep 10, 2008 at 14:54 Quote
ok so my 06 p3 frame is small so im getting a 08 mob. im also getting an 08 argyle 318. will all the parts from my p3+ the argyle switch over?

photo

2357545

this is the bike as of now

photo

2265658

this is the frame

photo

1644301

and this is the fork
flag skid16
Posted: Sep 10, 2008 at 15:21 Quote
should be fine man.
flag theweapon52
Posted: Sep 10, 2008 at 15:21 Quote
Everything will switch over just fine, you might have to check your bottom bracket size though. Thats the only thing i could see as being different.

oh and your seat post, the seat tube will probably be different sizes on the two frames.
flag
Posted: Sep 10, 2008 at 15:23 Quote
theirs three things that you ahve to check your headtube has to be the same size or unless it is 1 .5 on the mob get a 1.5 reducer to 1 1/8 headset and the rear spacing shouldnt be a problem and like said earlier your bottom bracket has to be the same as well
  • Previous Page
  • Next Page

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.011483
Mobile Version of Website