I just want to leave it here for fun. Just went full XC haha !!! The seatpost is already cut to about 150mm of length, but the ogirinal was 400mm long !!! BBB BSP-20 SkyScraper‎ 25.4mm
I just want to leave it here for fun. Just went full XC haha !!! The seatpost is already cut to about 150mm of length, but the ogirinal was 400mm long !!! BBB BSP-20 SkyScraper‎ 25.4mm
Y'all joke but a few years back when I was into dirt jumping I still needed to be able to cycle it a pretty long way (because I was 16/17 and couldn't drive yet).
I had a setup almost exactly like that. 400mm seat post, single speed, one brake. With 60psi in the tires.
I then had an integrated seat/post I could switch on for street credit
The 400mm post wasn't much of a fashion statement but it worked.
The gusset integrated combo shown here was my street credit setup. It was this bike but with 400mm post.
Y'all joke but a few years back when I was into dirt jumping I still needed to be able to cycle it a pretty long way (because I was 16/17 and couldn't drive yet).
I had a setup almost exactly like that. 400mm seat post, single speed, one brake. With 60psi in the tires.
I then had an integrated seat/post I could switch on for street credit
The 400mm post wasn't much of a fashion statement but it worked.
The gusset integrated combo shown here was my street credit setup. It was this bike but with 400mm post.
Haha nice story man. But jokes aside, it was very hard for me to find any seatpost with this diameter 25.4mm and longer than 200mm of total length with 2 bolts clamp Thompson Elite is just so much expensive for me, this one I get it cost me only about circa 20 USD .
I'm thinking about painting my bike! I just wondering do u guys know what the ball park price would be to powder coat pretty much my whole bike
Go to Alta or there's one in Leduc as well. Ballpark probably 200$ including media blasting. I'd say it's worth if you have a good frame, no point wasting money on an older frame but it definitely personalizes it more.