Nylon bushing for DJD driver.
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Nylon bushing for DJD driver.
23 Comments
  • 1 0
 Smile im only using it for a couple of rides as i hardly ever ride my bmx so :L and im getting new hub for christmas so it doesnt matter if i f*ck it up Smile
  • 1 0
 Fair enough, but I can imagine the metal on metal not sounding pleasent haha
  • 1 0
 i brought my bearings last night and i saw this and i mad 1 out of metal Smile lol
  • 1 0
 Making one from a solid piece of metal probably wouldn't go down too welllol
  • 1 0
 were did you get this plastic bit of a strange qeustan but out of bearing for my big boy bmx Smile
  • 1 0
 It was an off-cut from college.
Give me some dimensions and I could easily make you something and send it (if you cover the cost of postage).
  • 1 0
 top bit width is 24mm bottom width is 20mm and from top to bottom is 30mm cheers wb
  • 1 0
 I'm pretty sure it doesn't use two differant sized bearings. Looks like the outer shell of your old bearing is still sat in there in the back.
  • 1 0
 does this replace the bearings
  • 1 0
 Yupp, as Halo DJD Drivers can blow through bearings like you wouldn't believe! Might have been a better idea to use a hardened plastic, but I'll see how this one lasts!
  • 1 0
 i put in like half a tun of grease lol
  • 1 0
 what do you want me to messure it in cm or mm
  • 1 0
 Well CM wouldn't be accurate, so mm.
Was it a sealed bearing in there before? And is it still in one piece?
If so, just give me the number on the side!
  • 1 0
 o na mine takes to different bearing sizes so it wont fir :L
  • 1 0
 You'll be surprised what I can make...
  • 1 0
 um do u wat me to upload a pic and then you can see wat you can do
  • 1 0
 Sure, just something that clearly shows the bearings out of the hub (side by side whichever way round they go in the hub) and where they sit in the hub!
  • 1 0
 ryanspazo.pinkbike.com/album/parts
there you go Smile
  • 1 0
 Is that a Halo DJD driver?
  • 1 0
 no came of my 24 seven wheel
  • 1 0
 Looks exactly the same. Give me some dimensions!
  • 1 0
 na its not :L
  • 1 0
 Really does look like it to me. Ideally I would need you to post it to me so I can measure it properly and work out what I've gotta do.







Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.018825
Mobile Version of Website