AC855

Specialized levo 2021 The bikes done just under 800 mile and has never missed a beat. It’s just had a brand new nukeproof neutron wheel set and vee tires fitted. The forks have only been rode around 5 times. Feel free to dm me if you have any questions

Marin Alcatraz I built this bike in lockdown and absolutely loved riding it but I don’t have time to ride it anymore. It’s been sat in the garage for over 12 months so it’s time to let it go. Feel free to dm me if you have any questions

Bike is pretty much brand new, only used a handful of times. Selling due to it not getting used as I’m to lazy to pedal and ride the ebike instead. The only thing that’s been changed is the seat post. It has a pivotal post with an S&M seat. Feel free to message or call if you have any questions. Spec: Frame Series 3 6061 Aluminum Frame, 27.5” Wheels, 120mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs Front Suspension Marzocchi Bomber Z2 27.5", Rail Damper with Sweep Adjustment, 130mm Travel, Kabolt Bolt-On Axle, 44mm Offset Rear Suspension Fox Float DPS, Performance Series, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x25mm Hardware Top and Bottom Rims Marin Aluminum Double Wall, 29mm Inner, Sleeved Joint, Disc Specific, 32H, Tubeless Compatible Hub, Rear Shimano HB-MT410B, 148x12mm, Centerlock, Microspline Freehub Body Hub, Front Shimano HF-MT410B, 110x15mm, Centerlock Spoke, Nipples 14g Black Stainless Steel Tires Maxxis Assegai, 27.5x2.5", MAXX TERAA, EXO, Tubeless Compatible Derailleur, Rear Shimano SLX, 12-Speed, SGS Shift Lever Shimano Deore, 12-Speed, SL-7100R, I-Spec EV Crankset FSA Grid, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Boost Spacing Bottom Bracket Mego EXO 73mm BSA Chain KMC X-12 Silver and Black Cassette Shimano, SLX 12-Speed, 10-51T Brake, Front Shimano BR-MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor Brake,Rear Shimano BR-MT420, 4-Piston Hydraulic Disc Brake, 180mm Rotor Brake Levers Shimano BL-M4100 Hydraulic Lever, I-Spec EV Compatible Handlebar Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back Stem Marin 3D Forged Alloy, 35mm Grips Marin Single Clamp Locking Headset FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2”

I’ve owned this bike for nearly 2 years and its been a pleasure to ride. Has some paint wear on the rear triangle from my feet rubbing. Bikes mint and ready to ride. I upgraded the bars for renthal fat bar 30mm rise and a burgtec stem. Rear shock has also been upgraded to a marzocchi bomber cr shock with a cane creek vault 450 spring, i also have a 400 spring to go with it. The brakes have also been upgraded to sram re along with Shimano xt 12 speed gears. Wheelset is brand new with brand new tyres off a specialized Levo. Feel free to send me a message if you have any questions.

Transition TR11 2018 I built this bike in march 2019 because i was spending the summer season in Morzine for 3 months. I rode the bike for about a month and got a stone chip in the carbon on the downtube, the frame didn’t crack, it just took a little chunk out the carbon. I filled it with resin and rode the bike nearly everyday for the following 2 months i was there. The chip didn’t get any bigger and the bike is solid. Since then i have rode the bike a handful of times at bike parks. But the bike has sat in the garage gathering dust for 2 years and sadly the time has come to sell it due to funding a new van. The headset bearings could do with changing due to it sitting in the garage but other than that its great bike and rides awesome. Feel free to send me a message if you have any questions. Frame; TR11 Bars; renthal fat bar 30mm rise Stem; renthal direct mount Forks; fox 40 Shock; fox dhx2 550 spring Cranks; saint Brakes; saint Rear mech; saint BB; hope Wheelset; stans flow Tyres; magic mary’s Seat; Spank Sam Reynolds Seat post; race face Headset; hope