Block user

Recent

AltAlt mikekazimer's article
Sep 24, 2021 at 3:03
Sep 24, 2021
AltAlt mikekazimer's article
Sep 24, 2021 at 3:02
Sep 24, 2021
AltAlt mikekazimer's article
Sep 23, 2021 at 11:59
Sep 23, 2021
Check Out: Bike Storage Racks, Bearing Presses, Sunglasses, & First Aid Kits
We are working hard on it. We're ramping everything up now. Thanks for letting us know who needs it!
AltAlt mikekazimer's article
Sep 23, 2021 at 11:57
Sep 23, 2021
Check Out: Bike Storage Racks, Bearing Presses, Sunglasses, & First Aid Kits
Dear Home-Mechanics-of-MTB, we have sold out of the Oct. 8th shipment of ALT/ALT Suspension Bearing Presses. We are now taking pre-orders for our Oct. 22nd shipment of inventory. We're so sorry that we can't keep up but are working on larger inventory solutions. We just never dreamed that so many home mechanics needed tools.
AltAlt mikekazimer's article
Sep 23, 2021 at 11:47
Sep 23, 2021
Check Out: Bike Storage Racks, Bearing Presses, Sunglasses, & First Aid Kits
@Grantma: It's a configuration where you don't have access to remove a bearing by putting something directly behind the bearing. Like on a wheel hub. You only have access to the front side of the bearing.
AltAlt mikekazimer's article
Sep 23, 2021 at 11:45
Sep 23, 2021
Check Out: Bike Storage Racks, Bearing Presses, Sunglasses, & First Aid Kits
@plyawn: It won't remove blind bearing configurations. Check the front page of the website as well as the part of the video that says you need flat front frame surface, flat back frame surfaces as well as access to the back of the bearing. Also consider checking out our how to video to learn why DIY washers are probably damaging your new bearings. https://youtu.be/IKd0ygphlus I developed the tool because I started using a DIY setup and then read the instructions from the major bearing manufacturers. That's how the tool was born. It's real important that you push the bearing in by applying the install force against the outer bearing ring. Not saying that a DIY solution isn't possible, it's just more tricky than picking any old washer that pushes the bearing in. Thanks for letting us know how important bearing pullers are.
AltAlt AltAlt's article
Sep 23, 2021 at 3:07
Sep 23, 2021
Alt / Alt Introduces New Inexpensive Suspension Bearing Press
Due to continued stoke of the Home-Mechanics-of-MTB, we have sold out the Oct. 8th batch of inventory. Our next shipment of inventory will be received October 22th. We are currently taking pre-orders for this shipment. Thank you for your continued radness!
AltAlt AltAlt's article
Sep 21, 2021 at 12:41
Sep 21, 2021
Alt / Alt Introduces New Inexpensive Suspension Bearing Press
For those of you who have pre-ordered the Suspension Bearing Kits, new inventory is arriving on October 8th. Your order is expected to ship within a couple days of this. Please understand that there is a large number of orders going out in this shipment. Thank you for your patience.
AltAlt AltAlt's article
Sep 21, 2021 at 3:03
Sep 21, 2021
Alt / Alt Introduces New Inexpensive Suspension Bearing Press
We designed this kit for suspension bearings only, so I hadn't even considered using it on DU bushings. If your DU busing is 10mm, 12mm or 1/2in, our kit will be way too large for this. But thank you for bringing this need to our attention. We'll look into this kind of tool.
AltAlt AltAlt's article
Sep 19, 2021 at 2:50
Sep 19, 2021
Alt / Alt Introduces New Inexpensive Suspension Bearing Press
Sorry. We're taking pre-orders now, so that when inventory comes in, we will ship.
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login
Copyright © 2000 - 2021. Pinkbike.com. All rights reserved.
dv42 0.014240
Mobile Version of Website