Jun 17, 2019 at 15:37Jun 17, 2019
Selling a super clean and in excellent condition large 2018 Norco Sight C1 29 Carbon. The bike was purchased new in December and ridden with the factory components not more than 8 times. The drivetrain brakes and wheels were then switched with exactly 3 rides on them. The full parts spec is listen below. Also, you can choose from a 40mm or 50mm stem, 170mm or 175mm crankset and a 30 or 32 tooth chainring. The bike is super clean, with only a few signs of use. I placed clear gorilla tape on some of the vital areas like bottom of the down tube, seat stays and chain stays. The bar remains uncut at 800mm. I tried to put up numerous quality photos so you can see the full excellent condition of the bike. Please let me know if you have any questions. Fork: Fox Float 36 Factory 140mm Shock: Fox Performance FLOAT DPX2 Wheels: DT Swiss XM1501 Spline with 240 hubs and 54t ratchet upgrade Headset: FSA No 42 ACB 1.5" to 1-1/8" Front Tire: E-13 TRS Race Sticky Triple Compound 2.35 Rear Tire: E-13 TRS+ Dual Compound 2.35 Shifter: Shimano XTR Cassette: Shimano XT Derailliuer: Shimano XTR Brakes: Shimano XT 4 Piston Crankset: Decendent Eagle carbon Bar: Race Face SixC 35mm Stem: Race Face Turbine (50mm) or Race Face Turbine R (40mm) BB: Sram GXP Pressfit 92 BB Dropper Post: KS Lev Integra with South Paw Lever Grips: SDG Stage 1 lock on grip Seat: SDG Fly Mtn
Mar 6, 2019 at 9:54Mar 6, 2019
Hi there. Selling my Race Face Turbine R 27.5 wheel set. These wheels were $1,100 new. They were on one of three bikes I rode so they haven't seen a ton of time. Before putting them up for sale I pulled the hubs to check the internals and they were spotless inside. I was truly impressed by how well these things seal out the dirt. Bearing and everything inside look and spin excellent. Rims have some marks from use but nothing substantial and certainly nothing that would affect performance or integrity. Internal rim width is 30mm. If you don't know much about the wheels just look them up. They are a very high end set of allow wheels. Right after I got the wheels there was a flaw in the rear rim. Race Face warrantied it and replaced it along with new spokes. They replaced them with the bladed spoke so rear are bladed and front are not. Visually they look nearly identical so I wanted to point that out. A really fantastic set of wheels that I am only getting rid of because I only have 29er bikes now. Please let me know if you have any other questions. Thanks.
Bailey010 danielsapp's article
Feb 22, 2019 at 4:07Feb 22, 2019
Review: Kitsbow’s Glove Collab with Mechanix is Comfortable, But Flawed
I own a pair. Been wearing them for months with no bleeding issues at all and they feel great.
Jan 29, 2019 at 13:14Jan 29, 2019
Selling an excellent condition transition Sentinel frame, size large. The frame and shock is in excellent condition and has seen little use. I have tried to post a lot of high quality photos so you can see the frames condition. Their is only one small paint chip that I can see which is also shown in the pictures. I am also including the Cane Creek 40 headset. I left the shift and dropper cable housing in so the new owner doesn’t have to run new housing if they don’t want to. This housing is still in excellent condition. Please let me know if you have any questions. Thanks.
Jan 24, 2019 at 18:35Jan 24, 2019
Hello. I built this great bike up in August. I had about 10 rides on it before I had surgery and winter arrived. Shows minimal signs of use. Frame, drivetrain and most components were brand new when I built it. Wheels and fork were from a prior build and are in great condition. Rims have some scratches but thats it. I just recently did a complete service on the hubs. Not because they needed it, but because I'm very particular about keeping everything running pristine. I removed the decals from the fork because I like the stealth look of the solid black. I have a brand new decal kit (white) that I will include with the fork or install prior to sale if you prefer. I tried to put up numerous quality photos so you can see the full excellent condition of the bike. Below is a list of all the components. I also have a set of Race Face Turbine R wheels with Vault hubs that I could include instead for a lesser price. I also have various tires in different widths if you wanted something different. Im have my own home bike repair shop and keep everything maintained to high standards. Also. I have never registered the frame and could probably get the receipt placed in your name for warranty registration purposes. Please let me know if you have any questions at all. Thanks. Frame: Pivot Mach 5.5 size large Wheels: Industry Nine Hubs laced to Nox Kitsuma rims. Brake: SRAM Guide Ultimate Shifter, Cassette, Derailleur: SRAM X01 Eagle 12 Speed Crankset: Truvativ Descendant Carbon (170mm) or SRAM X01 Carbon (175mm) Shock: Fox Float DPS Factory Seat Post: OneUp 150mm with Wolf Tooth Lever Fork: RockShox Pike RCT3 with DebonAir Air Spring Handlebar: Chromag BZA Carbon with Chromag grips Bottom Bracket: Wheels Manufacturing Headset: Cane Creek 40
Bailey010 RichardCunningham's article
Jan 22, 2019 at 17:29Jan 22, 2019
Intense Restructures With New Management Team, Commitment to Racing Development
I believe the article states tomorrow morning the team roster is announced.
Bailey010 jamessmurthwaite's article
Jan 3, 2019 at 18:01Jan 3, 2019
Nov 14, 2018 at 18:25Nov 14, 2018
Only a handful of rides on it. Taken off a 2018 Norco Sight, size large. 150mm drop 31.6 diameter. Thank you.
Sep 29, 2018 at 11:58Sep 29, 2018
Brand new front hub. 28 hole. Boost 110mm spacing. Price includes shipping anywhere in US. Thank you.
Sep 8, 2018 at 17:38Sep 8, 2018
Hello. Selling my Santa Cruz Hightower CC. I purchased the bike new and have owned it for 2 years. It has been a wonderful bike and it actually pains me to sell it. But I have several bikes, and this has always been one of several in my rotation. It is used of course and shows what I would consider normal wear for the amount of use it has seen. I am a fanatic about maintaining my bikes and keeping them cleaned and lubed. I have my own repair shop that I do on the side, so I have professionally mainlined it as well. Fox fork was newly upgraded this year and the DVO Topaz rear shock was just before that. Below is a parts list. You can see it has a top of the line build kit. I have clear protective tape on the chain stays and seat stays, so any blemishes you see there is simply the tape pealing away. The seat is brand new, everything else is in used but great working condition. Shifts like butter and is ready to roll. I would love for someone to buy local and be able to see the bike in person, but will certainly ship it as well. Please let me know if you have any questions. Thanks. Frame: Santa Cruz Hightower CC Fork: Fox 36 Factory Shock: DVO Topaz Wheels: Industry Nine hubs laced to Nox Teocalli Carbon rims. (custom wheels built buy Fanatik bikes) Bar: Santa Cruz carbon Crank: Race Face Next SL Shifter: SRAM XX1 Derailleur: SRAM XX1 Cassette: X01 Grips: Deity Knuckle Duster Brakes: SRAM Guide RSC