Cdoc

Hi All, For sale is a front wheel from my old DH bike. Hub is an old Hope, standard 6 bolt with 20mm adaptors in Black Bearings feel a little rough, but swapping these out is an easy job Rim is an Alex double wall. 24mm wide, silver. Can be used for rim brakes too. Could do with a quick re tension before use. £20 ono collection or buyer pays postage Ta for looking Chris

Hi All, For sale is my old (pride and joy) GT DHI, circa 2000-2001ish. Probably size medium, but perfect for 5'8-6'2 6-8 inch at the rear, depending on the shock size fitted. Adjustable wheelbase and head angle. All bearings are sound, with no play. I-drive unit is also sound. No play in the dogbone link. All bolts/dropouts/mech hanger intact. No major damage/cracks All the usual scrapes and chipped paint, but in quite good condition for its age as it has been in storage since 2004. (Still got the factory gloss on many parts) The rear shock is in need of replacing as it does not work, but may be serviceable. (Will take a range of rear shock sizes) Included in the sale is: FSA headset, fitted. Could do with a new lower bearing ring. XTR crankset with single ring fitted. Slight play in bb. Easton EA50 seatpost MRP World Cup chain device, bit bashed. Old DMR V8's, just left on because I have no use for them Also, will throw in, Pair of Tioga fat32 dh tyres. both part worn, but one quite new. I would really prefer Collection as it is a bit of a beast to ship Ta for looking, Chris

Hi everyone. Price open to offers as these must go asap. For sale are my old Hope four pot brakes, removed from my DH steed, circa 2000-2001 Not sure if they are Enduro4 or DH4s Front No6 calliper in working order with pads included Rear Calliper has lost it's fluid in storage. I suspect piston seals are the culprit. (Full service kit is still available for these). Also, not as clean as the front. Levers Closed levers, some wear and tear, but mostly just worn paint. Still work just fine. Hoses are scuffed as expected £45 the pair, ono.

For Sale Rockshox Boxxer - Unsure about model (2000-2001) Lowers need really repainting after previous owner decided that they should be yellow. A couple of small marks on the stanchions, but nothing major. All bolts/threads intact and no cracks. 20mm bolt through. Steerer is 205mm Been in the attic for a few years and the oil is a little low, so in need of a good service before use. £55 ono? Littleborough area/M62 J21

Hadley titanium Rear hub in black, built up Mavic D321 rim Hub- Hadley Hub is in 150x12mm, 72 point engagement, full titanium freehub and internals. Wonderful condition, no bearing play ect. Sounds beautiful, a good alternative to ChrisKings Rim - D321, great condition, very little use and is spinning true. May need a quick spoke re-tension before use.