Damadster

For sale is my 2014 S-Works Enduro 29. I have moved back to flat land a year ago and it doesn’t get used anymore. It is in good condition and has been well maintained. It has some minor scuffs and scratches as shown in pics. Specialized S-works Enduro 29 Large Rockshox Pike RCT3 Solo Air 160mm (Fork is new) Cane Creek Double Barrel Air Roval Control SL Carbon wheels Full XX1 drivetrain, 30T chainring w/ low miles XTR Trail Brakes Specialized S-Works DH handlebars 750 mm IR blacklite command post (serviced a couple months ago) Chris King bottom bracket Truvativ stem Tires are tubeless, Maxxis 2.3” High Roller 2 EXO front, 2.25” Ardent EXO rear Pivot bearings are new. Pedals not included. See attached link for stock build specs. https://www.specialized.com/us/en/bike-archive/2014/enduro/sworks-enduro-29/51915

XL frame, carbon, and carbon cranks. Frame has no damage and carbon fiber has near infinite fatigue life. The bike has been cleaned up everything gone thru at the local bike shop, including truing the wheels and replacing the pivot bearings. I have ridden it long enough to wear out the rear cassette, which I think means 2 or 3 k miles. It has scratches and normal wear and tear for 3 year old bike. I ride a lot but the bike is in good condition with a lot of recently replaced components so it's ready to go without much maintenance in the short term. All stock and original except the following. It's set up as 1X drive XT cassette and chain, with about 50 mi on them Raceface 32T chain ring, about 50 mi XT brakes, about 500 mi (Muuuch better than the stock Magura) New roval replacement rims about 1000 mi ago New ground control 2.3 tire @ front -- tubeless Rear tire is Maxxis Icon LUST 2.1 with lots of tread left -- tubeless New SRAM bottom bracket and headset about 1000 mi ago. Ritchie stem, shorter with rise. I have the original stem if that preferred. I like being a little further back on the bike and a little more upright. Fork rebuild about 200 mi ago, stanchions are perfect. Bike is 6k plus new.