DunderMifflin44

Thanks for looking at this listing for my 2017 Giant TCR Advanced 1. I have owned the bike from new since June 2017 and was purchased from Long Eaton Cycles, Nottingham. The bike has been my main bike and has been used rain and shine. The overall condition of the bike is good but does carry some dings, no more than what is expected for a 3-year-old bike. The bike has never been dropped, crashed, or raced. The bike has never wanted for nothing, I make sure upkeep is taken care of, clean every other ride, strip and lube monthly and is service as required at my LBS in terms of cables and the fiddly bits I don’t get involved with. In the interest of full exposure, the bad bits I can find from looking over the bike is mainly cosmetic. Ding on the top tube, (See Pics) Ding where the rear wheel attaches Marks on handlebar where lights have been fitted The original spec can be found on the Giant website here: https://www.giant-bicycles.com/gb/tcr-advanced-1-2017. There is however been some upgrades/changes as parts have required changing. The bike is fitted with some Continental GP4000 tyres that look to have some life in them. Pedals are the alloy version of the SPD-SL – happy to leave with the bike, buyers choice. Wheelset: The bike has a set of Mavic Cosmic Elite (Non-Tubeless version) wheels. These were added when the original Giant PR-2 suffered a hub/spoke failure. I still have these sat in the shed and would be happy to chuck in on request if the full asking price is met. The Mavic wheels have had the stickers removed after some peeling started and they were flapping around in the wind. Front Mech: The original Ultegra 6800 mech failed and was beyond repair despite a couple of visits to the LBS. I opted to upgrade to the R8000 variant. Rear Mech: The rear mech met the same fate as the front and needed to be replaced for piece of mind, nobody needs to be miles from home stuck in a gear. I choose to install the 105 variant on the advice of my LBS. Other than price, I was led to understand there was no real difference in weight or performance. Seat Post: The seat post was recently replaced (Feb-20) due to the last one getting seized into place. The saddle height had not changed since the initial setup, I did however need to raise slightly and found I couldn’t. The bike has served me well but I am making space for a Hardtail that I have ordered via the C2W scheme. I have managed to obtain a bike box from a neighbour so it can be shipped at the buyers expense and organisation, once the funds have cleared. PayPal payment preferred. I am based in Shipley, Yorkshire.

Hello and thanks for looking at my relisted item.. Up for sale is my 2016 Cube Stereo HPA Race 120 (27.5) in black with blue accents. The size of the frame is 18" The bike was fully serviced in April 2019 by my local mech and has only been ridden in the dry 3/4 times since, I generally ride road these days, don't tell anyone. Parts serviced: - New BB - New Headset - New Chain & Cassette - New Brake pads / Brake Fluid Replacement (Also rear Calliper replaced) The bike has a Maxxis Minion DHF on the Front and a Maxxis High Roller II on the rear. I have fully cleaned / degreased the drivetrain, greased the usual parts and generally spruced it up. Mechanically the bike is solid and will give someone lots of fun I am sure. Full bike specification can be found on the Cube website here: https://www.cube.eu/en/2016/fullsuspension/stereo/cube-stereo-120-hpa-race-blacknblue-2016/ The bike does have some wear and tear and some signs of use, I can provide pictures if required. The rear wheel does have a slight indentation on the rim but it hasn't caused me any issues and Tyre sits so I haven't worried about it. I am based in Shipley nr Bradford but can also meet locally for convenience. Courier can be arranged at buyers expense once funds have cleared. Bank Transfer or Paypal preferred. I have advertised the the bike elsewhere. Happy to supply further pics if required. Thanks for reading and all the best.