EarlofBarnet

2010 Norco Shore Three 19" from centre of bottom bracket to top of seat tube - Norco size large Just been stripped, cleaned and checked over and reassembled with new parts where needed. Near original spec throughout: * Marzocchi 55 RS Forks - Just been stripped, cleaned and re-greased. * Marzocchi Roco Coil R rear shock, just had TF Tuned heavy duty bush fitted * SRAM X4 shifters and rear mech. Front shifter barrel adjuster needs replaced, still works ok though. Alivio front mech. Truvativ Ruktion double chainset with bash guard. Truvativ Howitzer XR bottom bracket. New Shimano HG50 chain fitted. New inner and outer gear cables fitted. * Upgraded Avid Juicy 4 RSL Brakes front and rear with 200mm rotors. Brakes have good pads and had just been bled. * Truvativ Hussefelt Comp Bars and Truvativ Holzfeller stem. * Norco hubs (20mm front) on Blue Alex rims. No ding, run true. Rear hub has just been stripped and reassembled with new bearings. Front hub could do with new cartridge bearings, which I've ordered and will try and fit prior to sale. Frame has a few small paint chips and scratches, but no dings dents or cracks. All frame bearings are smooth and have no play. Nice bike, just a little too big for me. Not sure when forks or shock were last serviced, so could be something worth considering. Priced accordingly. Fantastic bike for the money. Would prefer to meet buyer in Cumbria. However postage may be possible at cost.