Ellwood514

2016 Rocky Mountain MSL 790 Rally Edition XL. Frame is in good condition and protected since new along with the forks. Few marks on the frame and some tyre rub to the paint shown in pictures. Suspension was serviced every 6 months. Frame pivots and bearings in good condition with no play. Reverb has no sag and has been regularly serviced. Cranks, saddle and front rim have all been replaced in the last 6 months Wheels are currently set up Tubeless. Frame: Smoothwall Carbon. ABC + BC2 Pivots & Grease Ports. Press Fit BB. Internal Cable Routing. ISCG05 Tabs. RIDE-9 Adjustable Geometry + Suspension Rate Forks: 2016 Rock Shox Pike160mm RCT3 Rear shock: Fox Float X DPS Kashima Remote Custom Valved. SmoothLink Design 150mm. Rebound / Remote Firm - Medium - Open Settings / Bottom Out Control / EVOL Air Sleeve Seat post: Rock shox Reverb 170mm Front wheel: Hope Pro 2 with DT Swiss EX511 rim Rear wheel: DT Swiss EX 1501 Brakes: Sram Guide RSC,. 180mm center-line disks. Shifter: Shimano XT Rear Mech: Shimano slx 11sp Cassette: Shimano SLX 42-11 Cranks: Race Face Aeffect 175mm Chain: KMC 11sp Bottom Bracket: Hope Press fit Front tyre: Maxxis Minion 2.5 Rear tyre: Maxxis High Roller 2.35 Stem: Easton Haven Bars: Easton Havoc 7870mm Headset: FSA Orbit Grips: DMR Death Grips Saddle: SDG Bel air

SRAM G2 ultimate in Chrome. Brand new removed from new bike, never used. Front hose length 780mm. Rear hose length 1615mm. Brakes and clamps only. No disks. Postage is £7 SPECIFICATIONS - Application (DB): MTB Brake type: Hydraulic Blade material: Carbon Contact adjust: Yes Colour (DB): Polar Grey Anodized Pad type (Disc): Steel-backed organic Bracket (Disc Brake): Direct mount DIR Rear banjo option: Rear banjo option Reach adjust: Tool-free Pistons: 4 Piston material: Phenolic Plastic Hose routing angle: Adjustable banjo Caliper body material: Forged Aluminium Caliper hardware: Titanium Caliper construction: 2-piece Hydraulic fluid: DOT 5.1 Lever pivot: Bearing Lever body material: Forged Aluminium Rotor type recommended: 1-piece CenterLine Clamp Included (DB): Yes MMX Clamp Caliper Bleed Port: Bleeding Edge

Brand new Fox CTD 3 position handlebar mount remote and rear shock kit. Converts a CTD shock to a remote set-up for on the fly changes. The remote can also operate 2014-2016 Fox forks via a cable splitter not supplied. Instructions on how to change the lever body are given by Fox: http://www.ridefox.com/help.php?m=bike&id=524 Comes with Remote, Cable, Cable outer and shock assembly. Will trade for a brand new Float X lever assy only or cash.