Added 8 photos to Buysell
Apr 28, 2020 at 18:01Apr 28, 2020
Apr 28, 2020 at 16:29Apr 28, 2020
Hello all, I am selling a new un-used 2020 Fox 36 Performance 160mm travel, 27.5 wheel size. The fork was taken off of a new 2020 bike. It has been "Ride Wrapped" in satin clear tailored protection tape. The steerer has been cut to 8 1/8 inches and has a star nut installed. Feel free to message with any questions.
Apr 28, 2020 at 16:26Apr 28, 2020
Hello all, I am selling a un-used 2020 Fox Float X2 Performance 185x55mm trunnion mount shock that was taken off of a new 2020 bike. Tuning code DYWP Does not come with shock hardware or bushing. Feel free to message with any questions.
Added 10 photos
Apr 13, 2020 at 19:22Apr 13, 2020
Apr 13, 2020 at 19:12Apr 13, 2020
Hello all I am selling a 2019 Specialized Stumpjumper Comp Carbon 27.5 in size medium. I purchased the bike brand new and rode it from June until September 2019 (4 months). While I was riding the bike I was using a different set of suspension components, so the Fox fork and rear shock currently on the bike are un-used. I made a couple up-grades and or changes to the frame when I got it. The rear suspension linkage has been stripped of the paint, the original bearings were pulled out and swapped for EnduroMax linkage specific bearings, the original red decals have been covered with black vinyl and the frame has been “RideWrapped” in satin clear frame protector. Feel free to email with any questions or concerns. Parts that differ from stock build: -Chromag OSX Handlebar (cut to 760mm) -Ergon Grips -NEW SRAM Code brake levers -SRAM Code callipers (old gen) -Maxxis Minion DHF 2.5 set up tubeless -Maxxis Aggressor 2.5 set up tubeless -Enduro Max Linkage bearings -SRAM 30 Chainring (alloy) -UPDATED NEW SRAM GX deraileur I can swap the Code brakes that are on currently for a new set of Guide R's if preferred. Stock build list: FRAME - FACT 11m, full carbon chassis and rear-end, asymmetrical design, 27.5 Trail Geometry, SWAT™ Door integration, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel SEAT BINDER - Specialized bolt-type, alloy, 38.6mm REAR SHOCK - Fox Float DPS Performance, Rx Trail Tune, rebound and 3-position compression adjust, 210x52.5mm FORK - Fox Float Rhythm, 34, GRIP damper, 44mm offset, 2-position sweep adjust, 15x110mm, tapered alloy steerer, 150mm of travel STEM - Specialized Trail, 3D-forged alloy, 4-bolt, 6-degree rise HANDLEBARS - Specialized Trail, 6061 alloy, 8-degree backsweep, 6-degree upsweep, 27mm rise, 780mm, 31.8mm clamp GRIPS - Specialized Sip grip, half-waffle, S/M: regular thickness, L/XL: XL thickness SADDLE - Body Geometry Phenom Comp, hollow Cr-Mo rails, 143mm SEATPOST - X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SRL LE lever, 34.9mm, S: 125mm, M/L: 150mm, XL: 170mm FRONT BRAKE - SRAM Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 200mm REAR BRAKE SRAM - Guide R, hydraulic disc, organic pads, Guide S4 4-piston caliper, 180mm REAR DERAILLEUR - SRAM NX Eagle, 12-speed SHIFT LEVERS - SRAM NX Eagle, trigger, 12-speed CASSETTE - SRAM NX Eagle, 12-speed, 11-50t CHAIN - SRAM NX Eagle, 12-speed CRANKSET - SRAM NX Eagle, DUB, 170mm CHAINRINGS - Steel, 30T BOTTOM BRACKET - SRAM DUB, threaded BB RIMS - Roval Traverse 27.5, hookless alloy, 30mm inner width, tubeless ready FRONT HUB - Specialized, sealed cartridge bearings, 15x110mm spacing, 28h REAR HUB - Specialized, sealed cartridge bearings, 12x148mm thru-axle, 28h SPOKES - DT Swiss Industry FRONT TIRE - Butcher, GRID casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.6" REAR TIRE - Eliminator, GRID TRAIL casing, GRIPTON® compound, 2Bliss Ready, 27.5 x 2.6" INNER TUBES - Presta, 40mm valve
Feb 13, 2020 at 12:09Feb 13, 2020
Feb 13, 2020 at 9:26Feb 13, 2020
Sep 24, 2019 at 13:16Sep 24, 2019
Sep 24, 2019 at 12:24Sep 24, 2019