Henry06x

Basic charger RC damper out of a Boxxer select 2021ish. I upgraded.

Looking to sell my ‘16 Devinci Wilson L frame. Definitely more a medium with 430 reach. Was trying to trade for an XL frame and couldn’t ever find one so bought a different frame. Come with everything pictured no shock (runs a 240x76 or 9.5x3.0) have crowns for both pre and newer 2019 boxxers. Can run a 29” mullet setup with the silver crowns and a new 29” lower. Which is how I was running it. I did have to drill and easy out the shock bolt on the yoke (pictured). it was seized and the head stripped when I bought the bike. Held up fine with me riding it but I’m sure it’s a little weakened how it is. You can find them online but most sources are EU businesses I found. Im assuming you could find one through a Devinci dealer but there is not one near me. Shoot me an offer. I’m open to reasonable offers. Everything included: -2016 devinci wilson Frame with bottom bracket and headset no shock -Crowns 2015-2018 (Black) 2019-2023 35mm crowns (silver) -Shimano Zee cranks -Zitto bashguard/chain guide -Off brand 34 tooth oval chainring -Bontrager saddle -Diamondback seatpost -Yt seatpost clamp -Shimano Ice tech 203 rotors 1 warn other okay. Recommended minimum thickness is 1.5mm. 1 is 1.55mm other is 1.75mm (1.8mm is new) -Enlee lock on grips -MRP Ramp controller -2016 Boxxer stanchions with Rebound and high speed compression. Should be 2 or 3 tokens in air side. Damper side has slight wear at seal at boxxer logo. Air since has chips in coating up at crowns so will not effect anything both pictured -Rockshox mud guard (cheap one you ziptie on)