JFLACROIX

I have just bought another bike and this one is now looking for a new owner! Devinci Leo SL in size Large (56cm) is a race ready carbon bike that uses Devinci's higher end carbon layup to keep the weight low, and stiffness high. Riding this bike is an absolute blast. Devinci's recommended height range for this size is 5'10" to 6'2". I'm 6' and the fit is bang on. I originally bought this bike as a frameset in 2017 and cherry picked every single bits that went on it. Most of its life, this bike had different components that I have decided to move over to the new bike. This bike is now equipped with mostly new parts! It looks and feel like a new one! Ultegra R8000 front derailleur, rear derailleur, shifters, and brakes are in great shape. Only one season on these components. Carbon frame, carbon fork with carbon steerer tube, carbon seatpost, carbon headset cover, Titanium headset cap with titanium bolt - fast and light. NEW: Crankset: Ultegra with Q-Ring oval inner ring - great for climbing at it give you more power and feels smoother. (I could swap this crank for an Ultegra R8000 (no oval ring, a touch heavier) for an extra $100 - i.e. asking price +$100) Wheels: Stan's No Tubes - Alpha 340 TUBELESS Compatible! Add some valves and tires and you can run these tubeless. These were used for about 400km before I bought carbon wheels. They've been backup wheels since. Saddle: Fizik Aliante, Brand new! Brake pads: Brand new Shimano pads. Stem: Easton, Brand new! Handlebars: Easton, Brand new! Bartape: Fizik, Brand new! Tires: Maxxis Refuse 25mm, Brand new! ( I could swap the tires to Continentals GP4000 25mm for an extra $60). If you were to buy this bike today, you'd be looking at roughly $3800-4000, with many cheaper parts.

SixC Carbon bars from Race Face at full 800mm width (uncut). 20mm rise. They were used briefly on a bike that I decided to sell not long after I had installed these one - which I took off before selling, obviously. I also have a Turbine Stem (50mm, 6-deg) for an extra $75.

Turbine stem, 50mm long, 6-deg, 35mm clamp. Was used for about 5 rides before I decided to sell the bike that it was on. SixC Carbon bars (uncut 800mm) available for an extra $80

I got this fork last year with the intention to build the ultimate "monstercross/gravel/bikepacking" bike. I ended up selling the bike that this fork was meant to go on. Post mount, Tapered steerer tube, 19.5cm Crown race to top of steerer, 15x100mm Thru-axle (included), Split crown race included (easy to maintain, no trip to the shop needed). Paid $240 for it and is unused.

Shimano Zee brakeset (Front + Rear). Hose haven't been cut down, so it'll fit pretty much any bike. Plenty of life left in the pads. Less than 10 days of use.