JacobBlack805

2019 Santa Cruz Bronson CC has been a great bike but just ready to try something different. Had the bike for a couple of years, I am the original owner bought the frame and shock and built the bike. The rear shock has a Megneg air can on it in pictures but has original can on it now. I would recommend getting one again made the bike feel a little more planted and supple. Deity bars (780mm) stem(31.8mm clamp/35MM length) and seat post collar Code RSC brakes (200mm front rotor/180mm rear rotor) XO1 drive train and shifter except for GX derailleur (cassette 50T/der can go to 52T) E13 TRSr cranks and chainring (32T ring/ 170mm crank) OneUp Components dropper (180mm) E13 LG1+ enduro rims I9 hubs (hydra) Rockshox Lyric Ultimate (new damper/160mm) Rockshox Superdeluxe shock (Standard can) Let me know if you have any questions.

Giro Switchblade Matte Black size Small. I only used it for half a race season and have never slammed with it on. No cracks and no scratches on the helmet. Its an awesome enduro helmet but I already have another full face and don't need two. Let me know if you got any questions.

Troy Lee Designs D3 red/white/blue composite helmet size medium. I have had it for about 3 years and only used it at races and bike parks. Have never crashed hard with it. There are no cracks in the helmet, a couple of very small scratches on the paint. I can send closer shots if asked. Getting rid of it cause I'm sick of the color and i rarely use it.

I have 2017 Santa Cruz Bronson CC and love it but I am going to go for a 29" this year and have two bikes. It is a large frame and I'm 5'9" and it fits me perfect. I did put a Fox Transfer Factory 150mm dropper post on the bike because I wasn't really liking he race face dropper. Also have a extra vivid coil that I can sell for an extra $150. Will sell with either shock or both. rear shock-Rock Shox Monarch Plus RC3 fork-Rock Shox Lyrik RCT3 160mm wheel set-Industry 9 Enduro 30.5 dropper-Fox Transfer Factory 150mm seat-Chromag Moon bars-Chroma BZA 25mm rise 800mm length 35mm clamp stem-Chromag BZA 35mm length grips- sensus lite brakes-Sram Guide RSC shifter-Sram XO1 cassette-Sram X1 chain-Sram XX1 chainring-Chromag Sequence 32t cranks-Race Face SixC 170mm bottom bracket-Race Face I do have frame protection on the bottom of the bottom tube, no scratches there. The only spot with some small scratches is inside right where the tire runs through and I can send pics if so. The pics up r not super recent I have overhauled all the bearings and bolts/axles and everything is torqued to spec. Let me know if u got any questions.