Jelley

Hi, For sale is my XL 2022 Santa Cruz Nomad V5 C Custom Build. Rather reluctant for to less this one go! The frame itself has only been on 12 or so rides from new, same can be said for the forks, BB and dropper post. The rest of the build was transferred from a previous V4 build of mine, and is as follows: Forks: 2022 Fox 38 Factory Grip 2 | 170mm Shock: Öhlins TTX + Cane Creek Valt spring. New hardware fitted when the frame was swapped. Bars: OneUp 800 x 35mm rise Headset: Cane Creek Hellbender Stem: i9 A35 50mm Grips: PNW Dropper Remote: PNW Loam Lever Dropper Post: OneUp 210mm Brakes: Code RSC - New pads and bled with Motul RBF 660 Front Wheel: Stans Flow Mk3 + Hope Pro 4 (NTN bearings fitted) Rear Wheel: Stans Flow EX3 + DT Swiss 240 (54T ratchet upgrade) Drive chain: Shimano 12spd XT (Recent XTR chain, bb & new cables fitted) Bike is generally in great condition & has been regularly serviced and fettled. Unfortunately I was too impatient to fit Invisiframe so inevitably has some love marks Only selling as it's not getting the use it should. That, and I've a second small human on the way so can't justify more than one bike in the garage! Happy to answer any questions you may have Cheers Si

Hi Pinkbikers, Here I have my 2019 170mm Coil Grip 2 Fox 36s for sale. These have recently been coil converted (Vorsprung Smashpot to suit 89kg rider) by the wonderful folk over at TF tuned and have been ridden twice since. The wiper seals were also upgraded to the PUSH offerings at the same time too. Unfortunately my frame had to be warrantied and has since been replaced by a mullet, so these have been sat unused ever since - time for them to see some proper use. General condition is good, with a few scuffs on the lower leg decals as seen in the photos. Steerer tube is cut to 199mm. Happy to ship within the UK, Any questions, please ask Thanks Si

Hi All, Up for grabs is my beloved rig. Alas circumstances are such that my trail bike does everything I ask of it, as such this has got to go. So the details: Frame: XL 2016 TR500 - Invisiframed from new - BB faced and chased - Headtube faced - Enduro MAX bearings throughout - New main pivot bearings fitted last week, - New pivot hardware and geometry chips. Old ones had deformed so the bike had a slight annoying creak. - No dents on downtube etc Shock: Changed from photo! Ohlins TTX - Bought in the last 6 months from new - Serviced @ TF tuned and has seen two weeks used since - Cane creek Vault Spring in either 450 or 500lb Forks: Boxxer Team - Fast Compression Piston fitted - Recently serviced @ TF Tuned - Lower Leg will be done prior to sale - XF Spring fitted. Can supply & fit firm FOC Brakes: Sram Guide RSC - Second generation with Bleeding Edge port - Few marks from general use - Will be bled before sale Wheels: Spank Spike Race 33 / Hope Pro 2 evo - Hand built by Ryan Builds Wheels in Bristol - Spaim Force tripple butted spokes - Very small ding in rear rim. Tyres: Maxxis Assegai Front 2.5 DD TR Maxxis DHRII Rear 2.4 DH TR - Both in VCG. Rear has seen two days use. Group Set: Full Saint - BB replaced with the month. - 165mm crank. - Full 10 Speed block - Chain replaced last month (Sram PC1091) - SP41 Housing recently replaced Bar/Stem Hope 50mm DH Stem RaceFace Altas Alloy Burgtec Bartender Pro Grips - 30mm rise uncut 785mm Seat/ Seatpost: Thomson elite Post and Collar Fabric Scoop Any question please just fire them at me, Happy to talk anything through. Bristol Based Collection Cheers, Simon

Hi all, Up for grabs in my one of a kind 9.5 x3.0 Push tuned Van RC I created this little badger during my days as a tech at TF tuned; Alas those heady days have been and gone and so has the bike this was used on. As such this ones a bit more special, here’s what I did: -Push Mx end casting...complete with unique black LS comp dial, sad I know -Push’d internals + Bump stop -Dhx2 resi end cap to allow IFP pressure to be altered more easily than on a stock Van -Kashima shaft -Dhx2 spring collar Since the last service it’s been ridden a grand total of three times, just before posting this add I’ve given it a check over and the shock and all adjustments are working as they should. Genuinely an immensely compliant ride without all the additional faff of too many adjusters. Please note it is not being sold with a spring or hardware. Bushes will be brand new polymer ones Any questions please just ask Cheers Si

Hi all, So, here’s a set of ridden once 170mm 36 RC2s. Alas I had an off and have written off the chassis. Both uppers and lowers have twisted. Yes it annoyed the hell out of me! However this has left me with a like new set of internals that survived unscathed. 170mm air spring assembly and top cap RC2 damper - All adjusters caps etc included Currently the fork is without lower lube as it was put on an engineering surface to assess the damage. In summary I’m selling as a whole fork minus the axle Any questions just ask Cheers Si