JoeyDies

Beautiful 12x150 32h Chris King hub in Gloss Black This hub is great condition, HG driver is only minorly marred and internal components were recently serviced with all fresh king lubricants. Bearings spin smooth, hub is ready to roll. It's currently built up to an old 26" stans Flow rim that has enough of a ding that it won't setup tubeless, but If you happen to want the whole thing I'll throw in a few more 26" DH tires, otherwise I'll cut the spokes and pull the hub. Serial number - 1910005101 Please don't hesitate to any any questions or make offers, I'd love to see this go to someone who will use it.

2013 Transition TR250 Full 27.5 - Size Medium This bike was built and maintained by myself and another friend who are both bike mechanics. The bike was set up with low maintance and hard shredding in mind, while also adding a number of upgrades that make the bike fully relevant to today's riding. The bike is sized smaller than modern mediums, however I was able to ride it at 5'10" so that height or lower should be good to go. Parts list: Transition TR250 frame with fox coil shock Fork - Rockshox boxxer WC coil Front Wheel - 27.5 Stans flow Rear wheel - 27.5 Stans flow with stans 3.30 hub Tires - Michelin DH 22 and 34, both set up tubeless with less than 5 rides on each Rotors - 200mm sram Drive train Cranks - Sram descendant 165 Cassette - Shimano Zee 10 speed Shifter - Shimano Zee 10 speed Derailleur - Shimano Zee 10 speed Cockpit - Headset - FSA Brakes - Sram Codes Stem - Sunline direct mount Bars - Wake comp series Grips - ODI longnecks Saddle - Grey BMX pivotal Pedals - Diety Bladerunner aluminum This bike is ready to roll, as it was recently built up with fresh shift cable and housing, freshly serviced fork, new tires, new wheel builds, fresh brake bleeds all with less than 5 rides on it. This bike is a member of the long chainstay gang, with the chainstay in the long position to be able to fit 27.5 tires front and rear. Would be great for anyone trying to hit the bike park for a steal. Please don't hesitate to ask any questions, as I'd love to see this bike go to someone who's going to ride it hard. Happy to drive to meet up for serious buyers.

This is a very nice 2018 Diamondback Release 3 frame ridden and loved by a bike mechanic. The frame itself has been loved and shows some wear but still has many years of riding left in it. This platform is absolutely fantastic and can be seen being ridden by Berm Peak’s own Seth in many of his videos. The Geometry and travel of the frame combined with the fork make it the perfect all-around bike. I’ve only rode this bike for one season but it took me everywhere, from quick XC loops in Florida, to some BMX ish jump lines, to trail riding in New England and even a few bike park laps here and there. I’m sorry to let it go but my partner is all about bike parks so I’m switching to a more full time downhill bike Parts that come with the bike Diamondback Release 3 frame Upgraded 2018 yari fork with charger 2 damper Rockshox monarch plus rc3 debonair shock with piggyback and climb switch Headset 780mm width bars with 40mm stem Optional extras for 100 each Set of Guide R brakes PNW rainier dropper 150mm I'm currently servicing the Yari so pictures will be uploaded shortly once I finish