JumpsCrashPain
- Member since Mar 4, 2016
- Male / 39
-
Coeur d'Alene , Idaho - 0 Followers
- 0 Trailforks Points
Recent
Selling
Apr 5, 2019 at 20:07
Apr 5, 2019
Banshee Rune v2 Sz L (18.5")
$1400 USD2015 Banshee Rune size large. 160mm front/rear travel. Well maintained and everything working fine. All the frame bearings (suspension pivots, bottom bracket, and headset) were replaced a year ago. I just changed the oil in the fork, and the shock is brand new/never used.
COMPONENTS:
Fork: 2016 Marzocchi 350 CR 160mm (just changed the oil).
Shock: 2018 Rockshox Monarch Plus RC3 Solo Air LL (brand new).
Brakes: Shimano SLX. 203mm front, 180mm rear.
Drivetrain: XT/SLX. 2x10. 24/38 chainrings. 11-34 cassette.
Wheels: 27.5inch Rims - DT Swiss E512, Hubs - Hope Pro2 Evo 40 tooth (15x100, 12x142). They are not set up tubeless, but they can be.
Tires: Both are fairly new. Front - Kenda Nevagal Pro 2.35, Rear - WTB Breakout TCS 2.30.
Seatpost: X-fusion Hilo SL Strate 150mm dropper post.
Seat: Chromag Lynx DT
Handlebar: Race Face Atlas 780mm
Stem: Spank Oozy 65mm
Pedals: VP Vice
I will also include the flip chips to change between high/neutral/low positions.
Geometry numbers:
Reach - 455mm
Effective Top Tube - 615mm
Seat Tube Length - 470mm (18.5")
Head Angle - 65 degrees
Effective Seat Tube Angle - 75 degrees
BB Height - 345mm (13.6")
Chainstay Length - 434mm (17.1")
Added 23 photos to Fox-40-Performance-Elite-FIT4-RC-Damper-Revalve-2016
Mar 3, 2019 at 21:15
Mar 3, 2019
JumpsCrashPain mikekazimer's article
Apr 12, 2018 at 18:18
Apr 12, 2018
Marzocchi's New Bomber Z1 Fork - First Ride
@WAKIdesigns: Did anyone else go watch the Grip damper service video and see (at about 3:20) when they pull the "compression valving" which consists of 1 single shim?! Tell me again how 1 single shim is going to provide good dampening for a variety of people of different weights and riding conditions? I like the idea of the Grip damper, just like I like my current 350CR dynamic bleed cart, but watching that video left me with questions about the execution of the design. Has anyone taken one of these apart? Is there room in there to build a shim stack?
JumpsCrashPain mikekazimer's article
Apr 10, 2018 at 11:39
Apr 10, 2018
Marzocchi's New Bomber Z1 Fork - First Ride
@BryceBorlick: It has a Fox damper. So it will be as reliable as a Fox. Meaning incredibly frequent servicing.
