LeithB

Rare opportunity to purchase a BTR frame, with the optional extras this frame would cost around £2700 new. The frame is 27.5 inch and a size medium, Link to geo chart: https://www.btr-fabrications.com/products/ranger-frame-kit/#frame-options I purchased the bike from the original owner in September 2024 and have loved riding it, however its time for a change from the hardtails I've been riding for many years. I ran the bike single-speed and filled down the hanger for a cleaner look, however included with the sale is a new derailleur hanger. Comes complete with the Hope Headset The frame is fitted with the optional tube in tube internal cable routing for the gear and dropper cables which makes running the cables very easy and prevents any rattling of the cables against the inside of the frame tubes. Additionally the frame has ISCG05 tabs at the bottom bracket and a sleek integrated seat clamp. Also included is a custom frame bag that fits in the front triangle of the frame. The frame has no cracks or significant rust, just a few scratches which I have shown in the pictures. Unfortunately, the bike fell over whilst lent against a tree which put a small dent in the Top Tube of the frame ( I was gutted). This happened a few months ago and I have been riding the frame since with no issues.

Front Wheel: 110x15mm Hope Pro 4 Hub 6 Bolt Rotor Fitment Halo Vortex Rim Rear Wheel: 148x12mm Hope Pro4 Hub 6 Bolt Rotor Fitment HG Shimnao Freehub Body DT Swiss FR 541 Rim Custom Wheelset laced up with silver nipples and spokes which look awesome with the purple hubs. Didn't install the stickers on the DT rim when I got it because I preferred the stealth look. Wheels both run relatively true and the bearings all round have plenty of life left. Few scratches on the rims but no dents and they hold air perfectly. Comes taped up and with valves so is tubeless ready.

DVO Diamond Enduro Fork: 160mm Travel 190mm Steerer 100 X 15mm Dropouts High/Low speed compression adjustment Rebound adjustment Of The Top (OTT) Sensitivity adjustment Removed from a new to me bike and are in good visual condition because they were Invisiframed from new. I removed the invisiframe for the sale because it was looking quite tatty. The worst scratches are on the inside of the lowers where a mudguard was attached. There are some tiny marks on the stanchions which I have tried to photograph. They are evidently to small to damage to wiper seals as the fork does not leak any oil. I am told the previous owner recently serviced the forks. The green accents look pretty cool on the right bike

V1 One Up Dropper Post: 180mm Travel 31.6mm Clamp Wolf tooth dropper lever with hope matchmaker Removed from a new to me bike due to not being long enough for me. Although it is an older version it works flawlessly with no sag and minimal rotational play Stanchion tube is unmarked The seatpost that goes into the fame is quite badly marked however this is hidden when installed to a bike and the rest of the post is in excellent visual condition.

Hope Tech 3 E4 brakeset 200mm Front Rotor 180mm Rear Rotor Pads have aprox 50% life left and are not contaminated Brakes were removed from a new to me bike and are in good condition. The rear hose had to be cut for removal from an internally routed frame; so a new olive + barb and a bleed would be required to install onto your bike. I also have the pictured Wolftooth dropper lever and the matchmaker to attach it to the Hope lever which I can throw into the deal. Although this is the older version of Hope's brake the performance is excellent and hope will supply spare parts for many more years.

Burgtec RW Carbon Enduro Handlebar: 760mm wide 20mm Rise 35mm Clamp The bars are finished with a clear coat that shows off the carbon fibers, this isn't really visible in the photos. Burgtec Stem: 50mm 35mm Clamp Both in good condition with minimal scratches the worst of which are where the controls mount to the handlebar which is to be expected. Selling as they came with a bike purchase and my preference is for high rise bars.