Manx-Matt

As per the title, it's a 2011 Giant Anthem X4, size [b]small[/b]. Standard giant wheels upgraded to ZTR Crest on Hope Pro II late last year. These have had very little use. [i]EASILY[/i] under 100miles. They're currently run with tubes, can be converted to tubeless with the stans tape. Other than that, spec is: Fork: Fox F100 RL-11, tapered steerer, 100mm travel Shock: Fox Float R Groupset: Deore, with Deore Brakes and SLX rear mech. Giant finishing kit (handlebar, stem and seatpost) with Fi'zi:k Tundra 2 Manganese rails Pedals: Shimano PD-M520 Tires: Ardent EXO 2.25 front, Aspen 2.1 rear - Both pretty much new (as with wheels, under 100miles) There is a bit of heel rub on the chainset, other than that though, it's in damned good condition. I replaced the headset on this a couple of months ago, and it hasn't been used since I did. Will be boxed up and shipped to your door via parcelforce for the bargaintastic price of just £650.

I've decided that it's time to let the Reed go off to a new home where she will be loved and treated the way she deserves...... ridden hard like the filthy minx she is! SIZE: MEDIUM PRICE: £1,600 - open to (sensible) offers Might split if there is enough interest in the parts. Frameset and wheels need to go first. It might look to be a right beast, but as seen, it weighs 29lb. Background: Bought direct from Bionicon UK in March of last year. She's a former (display) model, the only one of her kind in the UK with this factory custom paint job. She got light use from May to September, when the winter bike came back out and she was serviced and put back in storage under a cover in the garage until May this year. By that point, I'd bought a roadie, which seems to have taken over from MTB. This year, she's been ridden.... twice, the last time being today. She's been well looked after though. Just had a full service, new bearings all round, new chain, cassette, saddle, tires and of course, fresh sealant to match. I kept her this year because I kept telling myself I was going to get back on and use her properly. Sadly though, it's just not happened, and my test ride today has just confirmed this is simply not my bag anymore. So..... here we are... Spec: Frame: Bionicon Reed 140 air Forks: Bionicon Double Agent 80-160mm Bars: Easton Haven Stem: Bionicon Twin-lock Headset: Bionicon F.I.T Grips: Superstar Excel Blue with Red lockrings Brakes: Avid Elixir CR X9 - Matchmaker Shifters: SRAM X9 Matchmaker Front Mech: Shimano SLX - Direct mount Rear Mech: SRAM X9 Chain Device: Bionicon C-guide V.02 Seat: Charge Spoon Seat Post: 2012 Reverb MMX Seat Post Clamp: Superstar Balance bolt - Red Cranks: Shimano XT with XT BB Chainrings: Blackspire 26-38 and a hope 40t light bashring. Chain: KMC X10sl Cassette: SRAM PG-1070 Pedals: Wellgo MG1 Wheelset: Front Hub: Superstar Switch Evo -Red - 15mm Rear Hub: Superstar Trizoid DH Hub - Red - 142x12mm (syntace X12) fitting Spokes: CX Ray Nipples: SAPIM Sils - Red Rims - Arch EX with stans yellow tape. Front Tyre - Racing Ralph Gatestar Snakeskin TLR - Running proper tubeless Rear Tyre - Racing Ralph Gatestar Snakeskin TLR - Running proper tubeless EDIT: It's worth noting that although she may LOOK to be a right beast. She weighs exactly 29lb as pictured (ie, including pedals etc). Could EASILY get her down to around 27lb if you don't need the dropper, get some lighter pedals etc. Also, if you're not already familiar with BIonicon and how they work, here is a helpful youtube video which demonstrates it quite nicely. It's all very clever stuff, but also dead simple. It's one of the easiest bikes I've ever serviced. Every part is user serviceable, requiring nothing more than a couple of hex keys (headset uses a cassette lockring remover). https://www.youtube.com/watch?v=YcVXz8U6UWY

Bought this Redline Asset from Winstanleys a couple of months back (still have receipt) on a whim. Received it, took it out the box, set it up, used it at the local BMX track twice and decided it's not for me. This bike is as new. Got all the original box, the original documents, spare set of pegs if you want them fitting. It's currently only got the back brake fitted, but I do have the original front brake (still in original wrapper) that will be included with the sale. Please note, bike is being sold with the original Red BMX pedals, not the black ones that appear in some of these pics. RRP is £350, I paid £230, and I want £170 (posted). Someone is getting a BARGAIN! Spec: Frame: D/S/P Design, Mid BB / Chromo DT, Removable Rotor Tabs Top Tube: 21" Fork: Redline Monster / Chromo Steerer & Tapered Legs Cranks: Redline Tubular Chromo 170mm 3-Piece Bottom Bracket: Redline Mid Sealed Bearing / Chromo Axle Pedals: Odyssey Twisted PC Platform / Chromo Spindle Sprocket: Redline XYZ 1/8" x 25T Freewheel: Redline Driver 1/8" x 9T Chain: KMC Z410 Rear Brake: Tektro FX340 U-Brake Rear Front Brake: Generic Levers: Tektro 299A Bars: Redline 28.5" W x 8" T x 12° Back x 2° Up / Hi-Ten Stem: Redline HollowPoint 55mm Headset: VP Threadless 1-1/8" w/Aluminium Top Cap Grips: Redline Hex Pro w/plugs Rear Hub: Redline Cassette Aluminium / 14mm Axle Front Hub: Redline Aluminium / 3/8" Solid Chromo Axle Rims: Alienation PBR 36H Tyres: Odyssey Dirt Path 20 x 2.1" Front / 1.85" Rear Seat: Redline Park Bench / 8mm Rails Seatpost: Redline 25.4mm Seatclamp: Integrated Bolt Weight: 25.5 lbs / 12.2 kg

Taken off my new Bionicon as I'm using my superstar wheels instead. £120 Posted via parcelforce 48hr Fittings are 15mm Front and X-12 (142x12) Rear. They can be converted using the tool-free DT conversion kits though (by far the easiest conversions I've ever done) Weight - 2,000g with tape fitted. Rims are Alexrims SX44 doublewalls DT 360 rear DT 370 front (branded as Bionicon) Wheels have only done a handful of XC rides, not jumped or crashed. Bearings are as new, perfectly true with no flat spots or dings. Couple of tiny marks on the paint in the rims that don't show up on camera. Freehub is in good condition, cassettes still go on and off without sticking, burring is only very slight (as shown in close-up below). Hubs are 6 bolt fitting and come with Schwalbe Blue tape fitted. I can even throw in a spare DT Swiss freehub ratchet. Nice strong wheelset at a reasonable weight.

2010 Bionicon Edison Frameset. Not been ridden for the last 6 months or so as I broke my leg in Oct and had to have surgery to rebuild my knee. I've just ordered a new Bionicon as a treat for myself after blitzing my rehab so this has got to go. PRICE INCLUDES UK SHIPPING VIA PARCELFORCE 48HR. Payment via Paypal. Either as gift, or with charges taken from YOUR end. VGC New bushes just fitted to shock. All bearings smooth and tight. To include: Frame (with shock) Forks Headset Stem Bars standard QR dropouts Front and Rear Comes with the upgraded damper cartridge fitted (£100 optional extra, bought new around 8 months ago) Got to sell it all together as it all works as a single unit. The shock is connected to the forks via internally routed air-lines. Also connected to a bar-mounted "magic button" which allows the user to not only change the travel of the forks from 70-150mm (and everything inbetween) but also extends/retracts part of the shock to give a better position depending on if you're climbing or descending. The rear travel actually remains constant, extendable part of the shock isn't part of the available travel, it is purely for changing the frame geo. so when climbing the rear stays at 140mm but the seat angle is steeper meaning you are closer to the verticle line running through the bb and it feels easier to cycle up hill clever thing about the travel change is that although the front drops from 150 to 70mm, the bottom bracket doesnt get any lower, it moves backwards instead and remains at the same height meaning you can carry on pedalling normally. it is dead easy to do and can be done on the fly, weight the front, press the button and the front drops, unweight the front and pres the button and the fork extends. the trvel adjust takes about a second from min to max and is infinitely adjustable, no steps and best of all, no stopping to do it. You can read about how it works here: http://www.bionicon.com/en/technology Or you can see it in action here: http://www.youtube.com/watch?v=08DlDKjx2xw

SLX Double & Bash - Blackspire Stinger - £70 - Posted Bought from CRC 6 month ago 22-36-Straitline Bash (still have the original, unused SLX bash if you're not a fan, will stick them both in, along with the original chainring bolts) Blackspire Stinger BB still nice and smooth, plenty of life left in teeth.

Good condition, nice and powerful with good modulation. Complete with adapters and 6-bolt 180mm rotors Hoses: Front = 800mm Rear = 1500mm