Mike-Millar

Selling a used 2019 Cannondale Scalpel-Si Hi-Mod World Cup Mountain Bike. The complete bike weighs only 22.3 lbs. (10.1 kg). The bike is well maintained with many of the original components replaced (as noted, below). The bike has a few cosmetic scratches as shown in the photos; no structural damage to the frame. Down tube and chain stays are wrapped with 3M ScotchGard Series Protective Film. If you want to know more about the suspension setup and other maintenance work performed on the bike, check out my YouTube channel, @bikesbymike. * I have a second set of custom carbon XC race wheels I would consider selling separately. They are built up with Light Bicycle RECON RM29C06 29” Flyweight rims and Sapim Race J-bend spokes. The front hub is a Lefty 60 and the rear hub is a DT Swiss 350. FRAME: Scalpel-Si, 100mm, BallisTec Hi-Mod Carbon (all frame bearings replaced in 2022) WHEELS: Cannondale HollowGram 23, Superlight Hi-impact Carbon, 23mm inner width Wheelset, Tubeless Ready. (used for two seasons; currently using a custom Light Bicycle wheelset) FORK: Lefty Ocho Carbon, 100mm, Cable Lockout (less than 5 hrs. riding since last 100 hr. servicing) REAR SHOCK: Fox Float Factory DPS EVOL, 100mm, Cable Lockout, Kashima Coating (less than 5 hrs. riding since last 100 hr. servicing) HUBS: Lefty 60 Front; DT Swiss C36 Rear w/t XD Driver 12-speed (wheel bearings replaced in 2022) TIRES: Schwalbe Thunder Burt 29” x 2.25, Tubeless Ready (replaced in 2023) Chain: SRAM NX Eagle 12-Speed (replaced in fall 2023) Rear Derailleur: SRAM XX1 Eagle – Mechanical (jockey wheels replaced in 2022) FRONT CHAINRING: SRAM X-Sync Direct Mount 12-speed, 34T, 6mm Offset (replaced in 2022) CRANK: Truvativ Stylo 6K BOTTOM BRACKET: SRAM DUB PF30 (replaced in 2022) BRAKES: SRAM Level Ultimate Hydro Disc (brake pads just replaced and never used. Brake bleed completed Oct. 2023) ROTORS: SRAM 180/160mm (both rotors replaced in 2022. Rotors require replacing when 1.55mm thickness; rear rotor measuring 1.72mm; front rotor measuring 1.73mm) SHIFTERS: SRAM XX1 Eagle, 1x12 Rear Cassette: SRAM XG-1295, X01, 10-50T, 12-speed SADDLE: Fizik Tundra 00 STEM: Cannondale C1, 7075 Alloy, 1-1/8”, 31.8, 7 degrees HANDLEBAR: Cannondale C1 Flat, Carbon, 8 degree sweep SEATPOST: Cannondale C1 Full Carbon, 31.6 x 350mm WATER BOTTLE CAGE: Easton Carbon PEDALS: [not included]

Race Face bottom bracket for use with 30mm spindle cranksets in the Race Face CINCH crank family. Allows use with Shimano press fit shells. Spacers included to accommodate additional bottom brackets (BB92/89.5/104.5/107). Never used and in original packaging. Willing to ship within North America.

PressFit 30 kit for DUB MTB cranks. Fits 46mm x 73mm frame shells. Willing to ship within North America.

Specialized OSBB PF30 for DUB (29mm) MTB Cranksets. PF30 to BB30 conversion. Ceramitech bearings. Never used. Willing to ship within North America.

SRAM XG-1295 X01 12-speed cassette. 10-50T gear range. Compatible with XD driver and 12-speed SRAM systems. Note: This cassette IS compatible with the older style, B1 type Eagle AXS drivetrains that use the UDH derailleur hanger, but NOT the newest T-Type Eagle AXS groupsets that have the "Full Mount" derailleurs.