MillerTFB

Looking for a 27.5 Chromag frame. Would want the frame to have the basics (headset, BB, axles, ETC.) Open to any colors! Thanks, Al

I bought this in 2019 with a frame to build a hardtail for my wife. It was on that bike until now and saw about 30 miles total of light mtb and gravel. I recently sent it in for service and Fox told me they would not service it as it was too old. Fox told me they could put in a GRIP damper but it was going to be over $200. Would be great if you want to rebuild a fork, or if you want something to just make a parts bin bike. Issues: Rebound doesn’t work - turning knob doesn’t do anything Needs a new damper It holds air but could probably use a new air spring. Stanchions are pretty clean. Selling as is. Specifications: Code: CBYY Travel: 120 mm Wheel size: 29” Steerer: 1.1/8" - 1.5" Tapered aluminum - measures 7.25”. Crown race installed. Adjustments: Climb/Trail/Descend,(3 positions),Rebound,Air spring pressure Axle: 15 x 100 thru Spring: Air Weight: 1.65kg Shoot me an offer! If you want a ship quote I will be using Bikeflights from 02048. Box size is 36x8x5 inches and the weight is 5.6lbs.

Traitor was a small steel bike company out of the pacific northwest. Traitor Cycles was bought by Transition and at some point (2016?) was sold off. The Crusade is their cyclocross frame and it is the same frame as the Transition Rapture with different decals. Set up as a singlespeed commuter. Previously the bike did have a 1x11 setup and was mainly used for bike paths and gravel rides. Did not see many miles at all as it was too small for the rider. Comes with an extra set of bars/hoods if you want to go drop - just add tape! Would prefer local pickup but I will ship if you really want it. If you want a ship quote I will use Bikeflights from 02048. Box size is 42x9x27 inches, and weight is 34lbs Specs: Weight: 24lbs as pictured Frame: Traitor Crusade 52cm cromoly steel Fork: Crusade Chromoly Disc – 1 1/8" Threadless w/160 mm IS Disc Brake Tabs (395 Axle to Crown) Front Wheel: Mavic A719 w/ Shimano hub Rear Wheel: WTB SX19 w/ Shimano hub Tires: WTB Interwolf 38c, front has more tread but never had any issues Crankset: FSA SL-K Light carbon Chainring: FSA 36T Stem: Salsa 90mm +-7 degrees Brakes: Avid FR-5 with BB& Calipers Rotors: Avid G2CS 160mm Handlebars: Urban 20mm rise, 31.8 w/ Pro thin grips Seatpost: No name carbon 27.2 Pedals: Wellgo B087 Saddle: Bontrager Evoke Extras: Portland Design Works Sodapop frame mount fenders Salsa Bell Lap drop bars Tektro singlespeed mechanical hoods VP XLC basket commuter pedals

Looking for a rigid MTB fork. Must be 29er (suspension corrected) and have at least 7" of steerer. Steerer needs to be tapered. Carbon or other material is fine. Ideally I'd want something similar to Whiskey No.9, Salsa Firestarter, Niner RDO rigid fork Thanks!!

Hi bikers! I’m looking for a rigid fork to finish a Kona Jake build. Hoping maybe someone has one lying around they don’t need. I want it to be Kona but I’m open to anything that fits the bill. Steerer needs to be 235mm+ (XL frame) but I’d prefer a little longer. Would like to fit 45mm tires 1 1/8 straight. V brakes. Ship or local pickup Cheers! See less