Motardhooligan

Listing my Knolly Warden for sale. It has been built with Downhill park laps in mind. Size Large 27.5" wheels front and rear 160mm travel RockShox Zeb installed April 2023 150mm Cane Creek DB Air serviced and upgraded Fall 2022 Full bearing service spring of 2023 (frame, wheels, hellbender headset bearings) New wheelset built spring 2023 (Chris King Hubs, dt swiss hoops and components) Crank Brothers highline dropper 170mm (serviced spring 2023) Race Face Atlas cranks (basically indestructible) Shimano 11spd XT drivetrain Shimano Saint brakes (new rotors, pads, and fresh bleed Spring 2023) Renthal Bars and Stem Ergon Grips WTB Volt saddle (chromoly rail version) Maxxis Assegai Front DD Maxxgrip Kenda Hellkat Pro Rear (wire bead with huck Norris insert) Bike is in excellent mechanical condition. It does have typical wear and tear from seasons of park riding but it has been completely gone through this April and is ready to rip. Only selling because I'm moving. Located in north Charlotte

Medium/Large 18.5 Chromag Wideangle frame. Used but in great shape. No dings, dents, cracks, etc. A couple rocks chips in the paint, all shown in photos. Frame has modular/replaceable dropout system for 10x135mm or 12x142mm axle (currently set up as 12x142). Frame has a 44mm headtube, optimized for 130-160mm forks, and a 31.6mm seat tube with stealth routing. BB is 73mm threaded. I ran it with a 170mm crankbros dropper fully inserted without issue. Cane creek 40 headset and seat clamp are included. Geometry numbers available on chromag's page by searching 2016 wideangle. Link will not post in listing. Thanks for looking!

Up for sale is my 2018 YT Tues CF Pro Race in Size LARGE. It has been ridden for one season (purchased 2019) and has been well maintained. This was my dream park bike and has been an absolute blast to ride but she needs a new home. An ankle injury has motivated me to dial things back a little and all this bike wants you to do is feed it big gaps and gnar. Out of the box it received an invisiframe kit in matte clear vinyl. It has a few spots that are peeling up (pictured). It also has deathgrip grips, an ODI numberplate, and a mud fender featuring the best place to take this thing in case you forget where you need to ride it. There is also a cushcore in the rear with the correct valve stem and a Maxxis Assegai double down up front. Original box, paperwork, and tools are all included. I also have a spare derailleur hanger and crank boot to throw in. There is one long scratch on the bottom of the rear triangle and a few small chips on the cranks. These are extremely shallow and do not affect function of the bike in any way. Very small cosmetic scratches can be found here and there from being park ridden but the invisiframe kit covers the majority of the bike. Asking $3300, no hurry to sell. Would prefer to sell local but can ship at buyer’s expense. Thanks for looking!