NathanB670

This is my 2020 Norco Revolver HT. It was used and well maintained for 2 years of NICA racing. The components are all listed below, but I will add that the wheels (rims, hubs, tires) are basically brand new as I had a set of carbon rims on the entire time I was riding it, the fork was just serviced a couple weeks ago, the entire drivetrain was replaced about a year ago and has under 500 miles, the bottom bracket was replaced about 6 months ago, and the bike has brand new grips. The frame, bars, and cranks have minor scratches but nothing that is very noticeable and definitely does not affect the integrity of the bike. The seat also has a crack in the plastic shell, which causes the back ride corner to be a bit unsupported, however, it is pretty much unnoticeable when riding. The bike weight comes in at 20.5 pounds. WILLING TO SELL FRAME ONLY FOR 950. FRAMESET Frame: Carbon XC Race Fork: Fox Factory 34 Step-cast 120 mm Headset: FSA Internal Headset DRIVETRAIN Shifter: SRAM X01 Eagle AXS 12 speed Derailleur: SRAM X01 Eagle AXS Cassette: SRAM XG1295 Eagle, 10-50T Chain: SRAM XX1 Eagle 12 Speed Crankset: SRAM XX1 Eagle B148 DUB 34T Bottom Bracket: SRAM BB DUB PressFit COMPONENTS Grips: Bontrager XR Elite Handlebar: Race Face Next SL Carbon, 760mm, 10mm rise Stem: Race Face Turbine, 60mm, 35mm bore Seat Post: RaceFace Next SL Carbon Saddle: Velo Senso Carbon Rails Brakes: Shimano XTR BL-M9100/BR-M9100 WHEELS Front/Rear Hub: DT Swiss M1700 Wheelset Rims: DT Swiss M1700 Wheelset 25mm Spokes/Nipples: DT Swiss Competition Straight Pull Tires: Schwalbe Racing Ralph 29x2.25 Rotors: 160mm Centerline 2 piece