NeilMerton

Update: I’ve looked into national shipping, and it’s something I’ll now considered (caveat being the shipping company will be able to send the bike to buyers address). Shipping cost will be covered by buyer. My Specialized Status 160 S3 mullet bike was bought in November 2020 from Brink UK, they upgraded many of the stock parts to Shimano XT and also replaced the fork with a RockShox Zeb Select+. The bike has been meticulously maintained and has had no damage (apart from expected wear and tear). Sizing I'm 1.78m / 5'8"ft, this S3 (medium) size frame suits a rider between 1.65m to 1.8m. Frame Specialized Status 160, M5 alloy chassis and rear-end, Size S3 (Medium) Frame Protection (installed by Brink UK from new) Invisiframe Downtube Protector (home upgrade from new) Gnartec Scorpion Kit Fork (upgrade by Brink UK) RockShox Zeb Select+, Charger 2.1 RC Damper, 44mm Offset, 160mm of Travel Fork Fender (home upgrade from new) RockShox Zeb Fender Bolt-on Rear shock (upgrade by J-Tech, Mar 2021) RockShox Super Deluxe Coil Ultimate, 230x60mm, 350LBS (Black) & 400LBS (Red) coils Brakes (upgrade by Brink UK from new) Shimano XT, 4-piston (Rotors F203/R180, pads 100 miles use) Shifters (upgrade by Brink UK from new) Shimano XT, 12-Speed Crankset (upgrade by Brink UK from new) Shimano XT, 170mm, 32T (usual shoe wear) Bottom bracket (upgrade by Brink UK from new) Shimano, threaded Rear derailleur (upgrade by Brink UK from new) Shimano SLX, 12 speed (100 miles use) Cassette (upgrade by Brink UK, previously XT) Shimano SLX, 12 speed, 10-51T (replaced during last service) Chain (upgrade by Brink UK, previously XT) XMC Silver, 12 speed (replaced during last service) Dropper seat post (stock) X-Fusion Manic, Infinite Adjustment, Two-Bolt Head, Bottom Mount Cable Routing, 34.9mm, 170mm (marks on collar) Dropper seat post lever (upgrade by Brink UK from new) Shimano XT Wheelset (home replacement) WTB ST Light i30 on Strange Hubs, Front 29" 15x110mm, Rear 27.5" 12x148mm (tubeless setup using Muc-Off, 250 miles use) Rear Axle (home replacement from new) Burgtec 175.5mm Specialized Front tyre (stock - lots of life left in it) Specialized Butcher, Grid Trail T9 29x2.3" Rear tyre (stock - lots of life left in it) Specialized Eliminator, Grid Trail T7 27.5x2.3" Handlebar (stock) Specialized, 6061 Alloy, 6-Degree Upsweep, 8-Degree Backsweep, 30mm Rise, 780mm Width Stem (stock) Specialised, Alloy Trail Stem, 35mm Bar Bore Headset (stock) Specialized Integrated Grips (home replacement) Ergon GA2 Black Saddle (home replacement) Ergon SM Enduro I have done my best to include photos of any paint chips that I am aware of (see the last 5 photos). Apart from these, the bike is in excellent condition. The reason of the sale is I'm just not using the bike much - I bought a hardtail at the beginning of 2022 and have found that the hardtail is much more suited to my local trails (Delamere Forest). According to Strava the bike’s done just over 1,000 miles. Most of those will have been during 2020 through to 2021. I've probably only used the Status a handful of times this year (2022). It's just gathering dust, which is a shame given how awesome and capable of a machine the bike is.