Orange-Coffee

Commencal Meta V4.2 New Zealand Edition Medium Frame. Suits riders from 168cm to 180cm. The spec on the bike is fantastic and includes a tonne of extra components that I have for the bike although open to offers without the other parts also. No swaps. Specs: - Frame: Meta V4.2 2018 with upgraded power linkage. There are some scratches & chips as you'd expect but the bike is covered in PPF and has no cracks or damage to the frame at all. - Forks: Fox 36 Factory 170mm that has been serviced every year by Silverfish (UK approved Fox service partner). - Shock: Fox DHX2 Factory 160mm that has also been serviced every year by Silverfish (UK approved Fox service partner). - Drivetrain: SRAM GX Drivetrain with an Absolute Black Oval chainring & Funn DH Chain guide & bash ring. The drivetrain still functions nicely with plenty of life left in it. - Wheels: Hunt Endurowides that are in great condition, there are a few minor scratches but no dents to the rim at all. Currently set up tubeless. - Brakes: Hope E4's 203mm rotors front and back that have been serviced yearly by Hope. - Dropper Post: OneUp 150mm with V2 lever that is only 6 months old with no marks on the stanchion at all. - Bars & Stem: Original Ride Alpha kit. - Saddle & Grips: Fabric Scoop Sport & Thin Flanged DMR Deathgrips. - Pedals: Not planning to include pedals but can be included for a small cost. - Tires: Maxxis Minion DHF & DHR 3C MaxxTerra Compounds both set up tubeless. Maintenance situation: - The Bottom Bracket will need replacing by the end of the summer as part of your standard regular maintenance and will run you about £35. - The grips are showing their age now and will need replacing by the end of the season to keep them fresh. Not an expensive replacement. - Drivetrain has likely got a summer season left in it but could use replacing for winter. - Dropper post: while the post looks has scratches on the outer, the stanchion is perfect. Works beautifully and is only 6 months old, I was just a spanner and installed it without cleaning out some sand from the seat tube! Included extras: - Maxxis Minion DHF 3C MaxxTerra Compound. - Can include the official Hope bleed kit for a small cost if required. - Spare Hunt spokes, some extra tubeless valves & Hunt included wheel tool. - Some spare linkage bolts & bearings but not a full set. Just leftovers from the last service as I bought too many. - Spare Commencal mech hanger (the one on there is currently perfectly straight as I have a mech straightening tool and checked it before posting this ad. - Spare OneUp dropper post shims & service grease. - Original Ride Alpha saddle. - Spare Truvativ Descendant Non-Drive side crank arm. - Epic Bleed Solutions 32mm flat spanner for removing the Fork air cap to change volume reducers (2 fitted in the fork at the moment). Happy to answer any questions about the bike or any spare parts. Get in touch before it's gone!

Selling my 1 year old Canyon Stitched 360. Bike rides beautifully and I'm sad to see it go but I've bought a new bike and have no real use for this one now. Frame has 3 chips on it near chainstays/seatstays (shown in photos) Tiny amount of cable rub on the fork uppers but touch up paint and it will be gone. Bars have some scratches but again could easily be covered up with touchup paint. Specs; Rockshox Pike DJ Solo Air Forks 100mm Truvativ Descendant Cranks Avid DB3 Brakes Gusset Slink Pink Half Link Chain (with spare links) Ergon GA2 Grips Continental Trail King 2.2 Front Continental X King 2.2 rear Has just had all hubs serviced and bearings have been swapped for new DT Swiss performance bearings. Not breaking it down for parts. Too much hassle. Includes: Original KMC Chain Two Maxxis DTH Tyres (Used but still loads of life left) Also includes the original plastic pedals if you want them. Message me if you've got any questions or offers. Thanks!