Pugga

I’m selling my 2023 Commencal Meta HT v2 build. It was purchased mid ‘23 as a frame only. Parts list is as follows: Lyrik Ultimate fork 150mm travel w/ quick release axle SLX drivetrain TRP Slate Evo 4 pot brakes We Are One Da Bar handlebar and stem Cane Creek 70 series headset I9 Torch hubs laced to e*Thirteen hoops Rear wheel is running Cush Core PNW dropper, lever, grips, pedals Ergon saddle Ride Wrapped since new ‘Covered’ kit Specialized Butcher 2.6 tan wall tires (tubeless) The bike is in great shape and only has 300 miles on it. I built it with high quality components with the intention of keeping this for a long time but recent injuries and age have made riding a hard tail less fun than I’d like.

I’m selling my 2023 Commencal Meta HT v2 build. It was purchased mid ‘23 as a frame only. Parts list is as follows: Lyrik Ultimate fork 150mm travel w/ quick release axle SLX drivetrain TRP Slate Evo 4 pot brakes We Are One Da Bar handlebar and stem Cane Creek 70 series headset I9 Torch hubs laced to e*Thirteen hoops Rear wheel is running Cush Core PNW dropper, lever, grips, pedals Ergon saddle Ride Wrapped since new ‘Covered’ kit Specialized Butcher 2.6 tan wall tires (tubeless) The bike is in great shape and only has 300 miles on it. I built it with high quality components with the intention of keeping this for a long time but recent injuries and age have made riding a hard tail less fun than I’d like.

I’m selling my like new Fezzari Delano Peak, Size Medium. I bought this bike at the very end of 2023 and was laid up with a broken limb. My intention was for this to be my ‘go to’ trail / all-mountain bike but have decided to keep one of my others instead. The bike frame and suspension has 13 miles on it from its maiden voyage, the tires and drive train have 0 miles (I swapped my carbon set onto the bike for the test ride). The bike is a Delano Comp with the following upgrades: Ibis Send wheels (upgraded from Stans Bear Pawls) Shimano XT 4 piston brakes (upgraded from SRAM DB8) Bike is fully ride wrapped Shock and fork custom decals (black out) DVO quick release front axle (will transfer the stock axle also) DVO fender PNW dropper lever Cane Creek 70 series headset Bottle holder with multi-tool MRP Shark fin bash guard Race Face Chester pedals to make it ready to ride! All other components are original: SLX drivetrain Ergon seat and grips PNW dropper Fezzari stem and bars Maxxis DHF up front, Maxxis Aggressor out back The bike is clean without a scratch on it. I can deliver around the Boston area if needed and will ship on your dime (I will bring the bike to a shop to pack).

I'm selling a Rockshox Lyrik Select +. It's for a 29" wheel, 150mm travel with the RC 2.1 damper. I bought this used from another PB member and never put them on a bike. They cycle nicely by hand and do not leak but I have never ridden this fork. I was going to use the uppers to rebuild another fork but went a different route and never needed to touch this one. Steerer is cut to 7.75", uppers are perfect, lowers show some minor scuffs as seen in the photos. I prefer local pickup but will ship on your dime if needed. I live just west of Boston, MA and can meet locally around the greater Boston area.

I'm selling my 2021 Polygon Siskiu T7, size medium with 27.5 wheels. I'm the original owner of the bike since it was purchased new in August, 2021 and I've added some nice upgrades to the bike. The bike has about 500 miles on it and it's been used as an all mountain / trail bike. The bike is in excellent mechanical condition and the paint is overall in good shape but does show a couple minor scratches from the trails. The most prevalent 'damage' is the end of the aluminum cranks. They are showing signs of rock scrapes but nothing structural by any means. All bearings and bushings are tight, no play in anything. Upgrades added are listed below: -150mm Rockshox Lyrik Ultimate - Added early in 2022, the factory Rockshox Recon will transfer with the bike -203 mm front rotor added to the front when the Lyrik went on. I'll include the original 180 mm rotor with the sale. -Rear brake pads were replaced last month with a fresh bleed. I'll include new pads for the front but the originals are still in good shape) -Maxle quick release thru-axle, stock axle included with Recon fork also -Industry Nine 1/1 Enduro S wheels, bought direct from I9 -Factory Entity wheels included, rear wheel still has factory Schwalbe Hans Damf mounted. Wheels were recently rebuilt by Landry's and I swapped to the I9's shortly afterwards. Original wheels were not built correctly from the factory and I snapped a few nipples after a month of ownership. No issues since Landry's rebuilt them, no issues with the I9's. -When I swapped to the I9's, I put one of the factory Hans Damf tires to the rear and bought a new Magic Mary for the front. Both tires have a lot of life left. -XT rear derailleur (I caught the factory Deore derailleur on a rock and bent the cage) -Headset replaced with Cane Creek Hellbender 70 last month -PNW Loam grips. Grips in the photo are showing some wear, I have a brand new set that will go with the sale. -All wheels set up tubeless with Stans -MRP chainring protector -Bottle cage and Lezyne pump holder (pump included) -At least 2 spare tubes included (I may have a 3rd kicking around) -3M downtube protection film I'll also include the factory aluminum pedals with the bike but they have seen their share of pedal strikes. Feel free to message me with any questions. I live just west of Boston and would prefer a local sale. I can deliver within a reasonable distance. Link to Polygon's website showing all the factory specs: https://www.polygonbikes.com/siskiu-t7/