RIPnDEN32

2021 Pivot Les SL, size Medium. Purchased in CO and travelled and currently residing in MO. Less than 200mi total. Built out by shop in CO with extra travel and dropper. Medium Frame Fox 34 Step Cast fork, 4.5" travel, EVOL, High/Low speed compression and rebound adjust OneUp Dropper Upgrade 120mm drop XT Drivetrain SLX Brakes DT Swiss M1900 rims DT Swiss hubs Maxxis Recon/Recon Race tires, just about full tread still Including Crank Bros Mallet pedals Located in St. Louis

• Niner 2016 Air9 Medium Carbon(non-boost) – crash replacement for an alloy Niner FS bike that served me well for almost 10yrs, but it’s not the type of bike I want to ride in the Front Range. Many do it, I’m not that tough. • Chris King ISO silver hubs just built up with new Stans Flow EX3 rims – Have had the hubs for 7-8 years and really enjoyed maintaining them. My brother had the CK press kit so overhauls were done with the proper tools. Overhauled this past spring. • Fox 2012 Factory Float29 120(non-boost) fork – great fork, fresh oil bath and seals ~annually, was white and I painted black, unridden since paint job back in summer • Shimano M8000 brakes - Used, struggled to keep the rear brake firm and getting the catch point where I wanted it, they were bled regularly, quick bleed and full bleed. They have new pads(not bedded in yet) and a fresh bleed and could very well have another 2-3 years in them. • Race Face Evolve stem and bar – 740mm bar, 70mm stem 10deg rise (I think) • Shimano M8000 drivetrain – 32T chainring, 11-46t • Wheels Mfg PF-30 OUT press-fit threaded bottom bracket, brand new • Thomson seatpost • I have DHF/DHR on there now but they’re too wide for the rear spot. I have something narrower on the way. Preference is to not get rid of the DHF/DHR set. • Used ODI Ruffian grips and takeoff saddle • Bike is non-boost frame and fork • This build out has not been ridden other than on the street during final assembly Bar/Stem currently set up with as aggressive as the components allow. Lot's of steerer tube left and the stem is inverted, so if a more upright position is your jam I can set it up that way for a test ride. Prefer to sell local but will ship at buyer's expense ($80 to shop box it up + shipping)