Added 10 photos to Buysell
Jan 12, 2020 at 11:20Jan 12, 2020
Jan 12, 2020 at 11:08Jan 12, 2020
Selling my much loved and ridden Wilson, only selling because I have to as I have a new bike.... just can't justify 2 dh bikes !! Viewings absolutely welcome. Can meet buyers if they are serious within reason / certain distance. Not wiling to split, want to sell as complete bike. * Aluminium Frame with Carbon Seat Stay * Invisiframed from new. * Superstar reach adjust headset +5mm for a 5’10-5’11 rider perfect now over standard bike. (Now 441mm). * Forks: 2017 Rockshox Boxxer Team: Medium spring with single Preload spacer fitted. * Shock: 2017 Fox DHX X2 Coil purchased and custom tuned by J Tech suspension. * 400 x 3 Cane Creak vault SLS spring. * Brakes Sram Code front and rear, fully bled and in great working order. Note: levers have been deliberately "roughened" for better grip in bad weather. * Uber components race compound brake pads - plenty of life. * Lightweight 200mm floating brake rotors. * Burgtech 50mm direct mount stem. * Burgtech 5mm stem spacer. * Brand new Burgtech 800mm DH bar (ready to cut to you’re length). * E Thirteen LG1+ Crankset and BB. * Custom Ultralight Mozart carbon DH chain guide/ bash guard. * Sram X01 DH 7 speed Derailleur. * Sram GX 7 speed cassette. * Sram GX 7 speed shifter. * Rear: Spank Spike Race 33 Race rim laced (Sapim Spokes) to Hope Pro 4 hub. * Front Wheel: Spank Spike 33 Race rim laced (Sapim Spokes) to Spank Spike hub. * Front Tyre: 3 rides old Maxxis Assagai 2.5 tyre. Tubeless set up and fully sealed. * Rear Tyre: used Maxxis Minion DHR II 2.4. Tubeless ready but set up with tube. * Both wheels running true no dings or flat spots. * Ergon DH seat and race face seat post. * Overall some marks on frame, axle end, upper frame and fork lowers from uplift, paint rubs on cranks, and light scratches from general DH life. * Ive been completely honest with all the images as best i can showing all the marks. * Some points the Invisiframe has lifted and dirt has trapped, but the frame has no cracks dents or any damage, but really good visually. * Mechanically in excellent condition no hidden gremlins all running perfect and true. (no expense spared in looking after this bike). Bearings are all good especially frame that have only been replaced recently. Also comes with additional spares: * Devinci life saver tool * BB tool for tightening. * Spare guides/bash plates for Mozart chain guide. * Very used Maxxis Minion DHRII 2.40 tyre and inner tube. * Spare springs: (worth £100) * 300x3 Titanium RCS spring * 350x3 Nukeprooof SLS spring Note no pedals included. PM me.
Mar 11, 2018 at 6:07Mar 11, 2018
Many years of great use (brought it from new), reluctantly selling as just not using it now ive moved onto Downhill. It’s a very lively “poppy bike” with spec level to handle most of the UK trails red and blacks, even good for dirt jumping and some bike park stuff (Forest of Dean downhill trails). Anyone who knows will know how much has been spent to upgrade this bike to a VERY high spec, and make it lighter. Pick up only, or can arrange to meet. PM me for more details if you need it. Im 5'10" and its OK for me. Frame has wear marks and rub marks from use, but structurally perfect. See images being totally honest so be under no illusions this is not a factory fresh bike, but overall condition is good. Couple of cable paint rubs (see pictures) Bearings all very good (replaced recently) Sram GXP 2x crank-arms - with spacers to convert to 1x. Stem is standard 50mm Nukeproof. Standard Nukeproof Seat. The Bike has been extensively upgraded from standard: * 2016 160mm Rockshocks Pike RCT3 standard offset forks, retail £850 new - replaced the 150mm RockShox Revelation RLT Solo Air; (still have service kit for the pike that will come with bike) 2 volume reducers fitted. * 119x51mm (130mm travel) Rockshox Monarch Plus Debonair shock RC3 (special tuned for bike but marked as M/L) retail £280 - replaced Rockshox Monarch R * Burgtec offset shock bushes to give more slack geometry, so head angle is a more modern 66º not the standard 67º. * Shimano XT front brake lever matched to Shimano saint calliper with finned race compound Über-components pads (replaced original sram db3) * 203mm Avid HS1 front rotor, (replaced standard 180mm rotor) * Shimano XT rear brake and calliper with finned race compound Über-components pads, (replaced original sram db3) * Converted to 1x10 gearing (32t front) (originally 2x10) * Shimano Saint 10 speed shifter (replaced sram X7) * Shimano XT shadow 10 speed medium cage derailleur (replaced sram X7) * Goat link gear hanger to allow better shifting to cassette extender (shifting is still extremely good, which some after market conversions don’t do) original Shimano link will come with bike. * 42 tooth Über-components cassette extender - Shimano XT cassette (replaced sram X5) 17 tooth ring will come with bike (removed to make room for cassette extender) * 32 tooth Über-components, chainring with spacers to correct for 1x10 spacing on crank arms. * Über-components ceramic b.b. bearings * Superstar EX23 wheels (replaced Nukeproof generators) wider internal width for better grip and strength. Retail £250 (sapim spokes, SKF sealed bearings) * WTB Vigilante tyres 2.3 27.5 TCS Light High Grip front, TCS Tough Fast Rolling Rear. (very good condition) * Tubeless converted already (with refreshed sealant) E13 valves. * Rockshox Reverb dropper post (just serviced) not standard on this bike originally in 2014 retail about £250 * Blackspire chain guide (no chain guard as standard) * Enve dh carbon bars (replaced Nukeproof Warhead 760 Riser) * Brand new ODI grips * Replaced Nukeproof upper and lower headset bearings. * Muky nutz mudguard * Will be sold with a set of Nukeproof pedals, just re-pinned and rebuilt. Standard spec: 130mm rear travel 44mm headtube ISCG 05 Shock length: 190mm x 51mm Seatpost : 31.6mm Rear axle: 142mm X 12mm RockShox Maxle Lite Chainstay length: 440mm BB shell: 73mm BB height: -13mm
Added 10 photos to Nukeproof-Mega-TR275
Mar 11, 2018 at 5:47Mar 11, 2018