Stufra

2021 YT Jeffsy V2 Core 4 Very good condition Color: Black Magic (Matte) Many upgrades including - Brown/copper/bronze anodized ‘accents’ (not over the top) - Better Bolts precision (US made) titanium bronze hardware (see components below) This bike was the highest spec originally (Core 4) and has been upgraded with many additional parts included in the sale. I tried to accurately capture the condition, current spec and additional parts included in the pictures and lengthy description, but am more than happy to provide any additional pictures or info. Please review the Jeffsy Geo chart, this bike is a sized as a smaller than average XL. I am 6’-1” and can fit between a L and an XL. This bike fits me perfectly with the following GEO highlights from YT: - Reach: 490mm - Headtube Angle (flip chip adjustable): 66° / 66.5° - Effective Seat tube (flip chip adjustable): 77° / 77.5° - Stack: 636mm - Chainstay: 440mm - Wheelbase: 1247mm Condition Highlights: - One owner since purchased from new in April 2021 - Mature male (58 year old) owned and babied throughout its ownership - Never ridden by anyone else - Used for trail (xc to light enduro) riding in Southern California and the west (AZ/UT). - Never used for jumping or extreme riding. - Regularly maintained and kept in good condition - No creaks or noises – This bike is extremely quiet - Very few wet rides (2-3?) and cleaned and lubed after all rides - Superficial signs of wear from minor chips/scratches/scuffs - Typical (See photos) - 2 areas with paint chips on top tube and down tube. Low impact several years ago. No damage other than to paint. - Scuffs on chainstays from pedaling and shoe contact - Scratches on stickers on fork, but not to lower legs or stanchion tubes (Kashima!) - Never any chain suck issues or signs on the bike - No scratches or impacts on the derailleur (shifts perfectly) - Typical small scratches/surface marks on rims, but no dents. Round and spins true - All bearings (frame, wheels, bottom bracket, headset) spin/turn smoothly Components (On bike): - Fork/Shock: Fox Float Factory 36 (Kashima)/ Factory Float DPX2 (Kashima) - Original - Serviced and tuned professionally by Fluid Focus (Certified technicians) - Wheels: DT Swiss XM 1700 Spline tubeless (Original) with Muc-Off gold valve stems and cap (upgraded) - Tires: Maxxis DHR II EXO 2.4”x29” Maxgrip (F)/DHR II EXO+ 2.4”x29” Maxterra (replaced) - Derailleur: SRAM XO Derailleur (replaced) - Cassette SRAM XX Cassette Copper (replaced) - Chain SRAM XX Chain Copper (replaced) - Crank: SRAM Descendent Carbon (original) with rubber end boots to protect legs and 32T chainring (replaced) - Stem: Renthal Apex 35 50mm, black/gold (original) - w/ bronze Better Bolts titanium hardware (upgraded) - Handlebars: Trail 1 Crockett Carbon 35 x 20mm, 780mm(?) (upgraded, brand new and unused) - Dropper Post: Fox Factory Transfer (Kashima) (upgraded, less than 6 months old) - Saddle: SDG Bel Air 3.0 (original) - Dropper lever: Wolftooth (upgraded) - Grips: Trail 1 Farlow Gap (replaced, brand new and unused) - All handlebar clams upgraded to matchmaker (2 total clamps) with bronze titanium hardware - Brakes: SRAM G2 RSC (original) 200mm discs front and back (replaced/no groves), with bronze titanium rotor bolt and caliper bolt hardware (front and back) and lever clamp hardware (upgraded) - Frame pivot hardware: Better Bolts bronze for 4 main pivots in frame/shock mount (upgraded) - Pedals: Shimano Saint platform w/SPD - Spacers and Headtube cap: Deity brown anodized (upgraded) - Headset: Acros AZX-576 (original) - Burtec fork straight Axle Brown anodized and Titanium clamp bolt (upgraded) - Brand new OE chainstay protector (from YT) Additional components/hardware included: - YT Tools/shock pump (Original, unused and in box) - Handlebar: Renthal Fatbar 35 (Black/Aluminum) 780mm (Original, perfect condition w/ no scratches - Used for 2 months) - Dropper Post: YT Postman 170mm (Original, used but in great condition and works well) - Dropper Lever: YT Postman (Original, works well) - Grips: ODI bar clamp (Original, unused) - Fork/Shock Volume Spacers: Fox factory (some used, most unused in package) - Front Fork Fender: Fox direct mount with mounting hardware (Little to no wear, minor use) - Front Axle Quick release: Fox (Original, some surface scratches) - Crank: SRAM GX 165mm (Minor use – 10 rides(?) , some surface scratches - Chain Guide: E-Thirteen (Original, used but good condition) - Pedals: YT flat pedals (Original, unused and in packaging) - Brake Pads: SRAM G2 Organic replacement pads x2 (new, unused in package) - Original Hardware: frame pivots, handlebar clamp and hardware, top cap and spacers, brake caliper hardware, stem hardware - SRAM Eagle Chain Power link: New and in package (new, unused in package)