Vespasien

Vacuum / Pressure Bleeding Machine for MTB Rear Shocks €850 For sale: a professional vacuum/pressure bleeding machine for mountain bike rear shocks, built using high-quality industrial components. It allows vacuum and pressure bleeding to efficiently remove all trapped air from hydraulic dampers, ensuring a fast and reliable service. How it works Compressed air inlet (left side) - Industrial quick-connect fitting - Adjustable pressure regulator - Safety relief valve - Supply shut-off valve Compressed air is routed through the manifold and then to the selected oil reservoir. Vacuum pump inlet (right side) - Industrial quick-connect fitting - Air vent filter - Independent shut-off valve for vacuum operation The two valves allow you to switch instantly between vacuum and pressure without disconnecting or reconfiguring the system. Oil reservoirs The machine is supplied with 2 oil reservoirs. Each reservoir includes: - Isolation valve - Stainless steel braided hose - Quick-connect fittings The transparent housings allow continuous visual monitoring of both the oil level and any air bubbles during the bleeding process. The reservoirs are not connected in series. Each one connects independently to the manifold, allowing you to use whichever oil you need (2.5 WT, 5 WT, 7.5 WT, etc.) simply by connecting the desired reservoir. Additional fully assembled reservoirs are available for €120 each. Equipment - Adjustable pressure regulator - Safety relief valve - Combined pressure/vacuum gauge - Machined aluminum manifold - Manifold designed for wall mounting with 2 mounting holes - Quarter-turn ball valves - Industrial pneumatic quick-connect fittings - Air vent filter Also included: - 2 transparent hoses (3 meters each) - Quick-connect fittings for both hoses The only items not included are the shock-specific adapters, allowing each user to install the fittings that best match their suspension brand or preferred workflow. Compatible with Fox, RockShox, Öhlins, Cane Creek, DVO, EXT, Formula and virtually any hydraulic mountain bike rear shock. Key features - Instant switching between vacuum and pressure. - Continuous visual monitoring of oil level and air bubbles. - Oil reservoirs can be exchanged in seconds. - Fully modular system: add as many reservoirs as desired to keep multiple oil viscosities permanently available. - Easy wall mounting. - Robust industrial components that are easy to service or replace. Sold without air compressor and vacuum pump. The machine is brand new and has only been used for testing during development. Designed to deliver professional-quality bleeding performance while remaining fully modular thanks to its interchangeable oil reservoir system. Worldwide shipping available.