ajmaxey

2013 Yeti SB-66 26" I bought this frame with the rear shock in 2016 and pretty much built this bike from the ground-up. In the last 7 years I may have put about 1500 miles on it. I don't ride a lot and I haven't ridden it at all in the last year. This bike likes to go FAST and I just don't really do that very often and it far exceeds my skill level. I have modernized it pretty well with how 26 inchers are hard to seek parts for. I will list everything I added onto it with the year marking when it was installed on the bike: 2016 -Fox Float CTD with kashima coat (this came with the bike so it's from 2013) -26" Mavic 319 rims (I bought these second hand off a friend. I believe they are from 2014) -Nukeproof hubs (these came on the wheels I bough off a friend. I believe the same year) -Fox Float 34 CTD with kashima coat -Easton 60mm stem, 8 degree rise -Cane Creek Forty head bearing -WTB Pure V seat 2020 -MAXXIS Ardent 26x2.4 tires -Shimano Deore XT crankset (I bought this second hand with the expectation of upgrading shortly after. I don't know the exact age) -Shimano MT800 bottom bracket -Shimano Deore XT brakes 180mm front disc and 160mm rear disc -SRAM Eagle NX 12 speed shifter and derailleur -SRAM Eagle NX 11-50 cassette -Wolf Tooth 32T drop-stop chain ring -Crank Bros 780mm Iodine 2 bar trimmed to 750mm. 30mm rise -Crank Bros Stamp 1 pedals -ODI grips in Yeti blue 2021 -PNW 150mm dropper post EXTRAS AND SPARES! -Spare paws for the Nukeproof rear hub. -9mm QR barrel for the Nukeproof fron hub -9mm QR Yeti adapters brackets for the rear -Bash guard bracket -Large Yeti biking jersey that I've never worn because it's too big for me -Owners manual and documentation Cons of the bike: -The brakes could use a service. I think some fluid leaked on the rear brake and contaminated the pads. I fixed the leak, but I haven't gotten around to replacing the pads and cleaning the disc. -It could probably use a general tune-up.

I have a 110mm Sette Edge stem that I've only used on 3 short rides. It's flawless, but too long for me so I'm selling. 1 1/8" steerer clamp, 31.8mm handlebar clamp, 7 degree rise, 40mm stack height. This stem is super light, maybe 130g. FIRM on price, FREE SHIPPING to lower 48 states!