ajpvan

Mounted but never used on trail.

New Huck Norris insert for 29er wheel which can be cut down to fit smaller sizes. It's the M version for 25-35mm rims.

2017 Canfield Nimble 9 (XL) in Chrome - this is the boost version of this frame - full specs here: https://canfieldbikes.com/pages/2017-canfield-nimble-9-boost This bike is insanely fast with the single-speed setup - ultimate simplicity and quiet ride. Bike is set up with a 150mm fork which puts the head tube angle at 66 degrees. In case single speed isn't your thing I can also include an xt 11sp drivetrain (sram cassette with xd driver to fit the wheelset) Fork: RS Yari @150mm w. a Charger Damper from a Lyrik (can also include a 130mm airspring) - really feels/rides the same as the lyric and has the same dimensions for the fork construction. Headset: Cane Creek 40 Series Stem/Bars: Raceface Aeffect - 50mm stem, and 35mm x 780mm bar Wheels: Stans Flow MK3 front and EX3 rear on DT 350 (both set up tubeless) Cranks: Truvativ X9 - 175mm Chainring: SRAM 32T Cog: 16T on ProblemSolvers SS kit for xd driver (also have 18T included) Brakes: SRAM Guide Rotors: Shimano 203mm Front & 180mm Rear Seatpost: Oneup 170mm

Oneup Underback ISCG05 with the different sizes for each chainring

Mud Hugger, works fine but doesn't work with my bike setup.

Do You Even Drift Bro (dyedbro) universal frame protection kit. Limited Edition ‘Long Live Chainsaw’ edition. Full frame protection includes down tube, top tube, chainstays and seat instays. Brand New, includes installation tool, sticker and instructions. Boxed. Fitting sizes and instructions in images.

Have not been ridden much since a full bearing overhaul was done. Have the normal paint wear but are in good shape with good pins

Process 153 XL with a new front triangle and minimal wear on the rear bits. - The suspension is stock, Lyric RC2, Super Delux RCT, both serviced recently - Sram Descendant carbon cranks - Stans Flow S1 wheelset with Hope Pro 4 rear hub - Saint brakes - Spank Spike stem (35m length) and Vibrocore bar at 800mm - 170mm Oneup dropper lever - XT 11sp drivetrain with Sram 11-42 cassette (XD driver) - Wolftooth Precision Headset Bike was only ridden for a half-year.

30.9 diameter. Internally routed 125mm reverb with the conversion kit for cable actuation (easy to install). Post works well, no sag or excessive play. Lever included one from a fox transfer I believe, bar clamp

Both wheels are straight and have no chips or damage to the carbon besides superficial scratches. Front is TR36 on Noble (Onyx) hub with ceramic bearings. 15x110 boost 6 bolt rotor. Have axles for both Sram TorqCap and regular fox fitting (will include both with sale). Rear is TR38 on Noble (Onyx) hub with new ceramic bearings. 12x148 boost 6 bolt rotor, Sram XD driver. This is the silent sprag clutch hub, with instant engagement. These wheels are built to be as strong as possible, with brass nipples and the thicker guage of spokes recommended by Nobl (both were built in house by Nobl).