al-x

If the ad is up it's available and saves you asking. Ritchey WCS Trail Ø31.8 x 70mm Blatte stem with WCS graphics for sale. Features: Ø 31.8mm bar clamp x 70mm reach x 0º Deg rise 3D Forged 2014 alumiumum alloy with "Blatte" aka matte black anodized finish C220 clamp offers 220° Deg. handlebar clamp wrapping further around the handlebar than traditional 4-bolt designs which distributes clamping stress more evenly, perfect for carbon bars. 43mm bar clamp width and 45mm stack height 129gr with all hardware. 70$ Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Stem is in Gibsons however I travel into Vancouver often and can meetup if you are serious buyer. Call or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up it's available and saves you asking. Ritchey WCS Carbon Low Rizer Ø31.8 x 660mm uncut x 15mm low rise handlebar with WC graphics for sale. In excellent condition, visible carbon weave, no crashes, just a few scuffs. Low 15mm rise x 660mm wide uncut w/ 5º deg upsweep & 9º deg backsweep. Ø31.8 bar clamp diameter with textured clamping area to reduce the risk of bar slippage. Carbon lay-up is tuned to provide torsional strength and vibration damping. clear finish over carbon weave with World Championship Series graphics. Internally reinforced for shifter/lever clamps and to accept bar ends. 170gr. (claimed) 60$ Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Handlebar is in Gibsons however I travel into Vancouver often and can meetup if you are serious buyer. Call or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up it's available and saves you asking. 2014 Fox Factory 34 Float FIT CTD Trail Adj 26in 160mm 1.5T fork for sale. Loooooong 233mm / 9-1/4in 1.5T tapered alloy steerer tube with 7000 series alloy Kashima coated stanchions and magnesium lowers. Excellent mechanical condition, structurally sound, and all adjusters function. Stanchions are in mint mint condition as are lowers, other than very minor scuffs and bubbles to driveside lower decal (last photo). 160 mm travel Lever actuated 3 position CTD compression damper: Climb/Trail/Descend modes. FLOAT Air Spring with FIT Damper w/ lever actuated 3-postion CTD Climb-Trail-Descent settings with Trail adjust range, Rebound adjuster and air spring pressure. Ø 34mm dia. 7000 low friction Kashima anodized stanchions. Magnesium lowers with post mount 15QR x 100 NonBoost thru axle 160mm post mount 51mm offset 1.82 kg / 4.01lbs Serial number: 451158-0006 ID Code: CLSH Part number: 910-01-606 Description: 2014, 34, K, FLOAT, 26in, F-S, 160, CTD ADJ, FIT, Blk, Gold Logo, 15QR, 1.5 T, 37mm Rake, AM Has installed star nut and includes Fox QR axle. 399$ Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Fork is in Gibsons however I can meetup in Vancouver if you are serious buyer. Call or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking. ***If you have specific tech questions say, compatibility with your particular bike, best for you to confirm with whoever you take your fork/shocks to for service and/or Fox. thx***

If the ad is up they're available and saves you asking. Wellgo MG 1 magnesium flat pedals for sale. These MG-1 pedals have a handful of rides on them and are in excellent condition.Bearings are nice and smooth, bodies show minor wear and appear to have start life out green then been painted black. Super light and grippy flat pedals. Magnesium painted pedal body w/ replaceable pins Cr-Mo spindle with DU and sealed bearing, 9/16in thread Platform size: 114 x 106mm x 31mm height 50$ Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Pedals are in Gibsons however I travel into Vancouver often and can meetup if you are serious buyer. Call or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up they're available and saves you asking. Shimano XTR FC-M980 175mm cranks and XTR SM-BB90A 68/73mm bottom bracket for sale. Very nice example of XTR M980 cranks. These cranks are in excellent used condition, mechanically and structurally sound: pedal threads and crank splines are all in great shape. There is a minor scuff to the polished outer face of the driveside crank arm and a few marks on both crank pedal ends. BB bearings are driveside 8/10 and nondrive 9-9.5/10 condition. 175mm crank arm length Hollowtech II crankset design 168 mm Q-Factor 4 Bolt 104BCD BB shell width: 68/73mm or PF Originally intend as 2x10-speed..can be used 1x or 2x, whatever your heart desires and build requires. 225$. Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Cranks and bb are in Gibsons however I travel into Vancouver often and can meetup if you are serious buyer. Call/text or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up it's available and saves you asking. Shimano XTR x North Shore Billet x BlackSpire 1x10s 11-42T clutch drivetrain for sale. This drivetrain is in excellent condition with very low mileage as spent most of its life on bike parked in the garage, sad face. It is a matched set and will be sold as a lot only. Drivetrain includes: Shimano XTR SL-M980-A 10spd shifter, i-Spec A mount Shimano XTR RD-M988 10spd carbon SGS long cage clutch rear derailleur North Shore Billet 30T Narrow Wide chain ring, 4 Bolt 104BCD with chain ring bolt set Shimano XTR CS-M980 11-42T 10spd HG HyperGlide cassette with a BlackSpire ReCOGnition 42T large cog: HyperGlide 3-piece spider arm with 5 TITANIUM cogs KMC X10SL with Quick-Link connector 325$ Sold as lot only. Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Drivetrain is in Gibsons however I can meetup in Vancouver if you are serious buyer. Call or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up they're available and saves you asking. Shimano XTR BL-M988 / BR-M985 brake set with IceTech SM-RT86 Ø180 & 160mm 6 bolt ISO rotors for sale. These XTR brakes are in excellent condition, are nice and strong with good bite, and hoses are in great condition Come with Shimano G04S metallic sintered pads at +85% pads remaining (first photo = front, 2nd = rear). Sadly they have spent most of their life on bike parked in the garage. From a size Large bike with hose lengths: Front = 960mm / 37-3/4in Rear = 1665mm / 65-1/2in Includes caliper and rotor mounting hardware and 20mm IS to post mount adapter pictured. 299$ Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Brakes and rotors are in Gibsons however I travel into Vancouver often and can meetup if you are serious buyer. Call/text or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up they're available and saves you asking. Raceface Diabolus DH 170mm black ano cranks and Diabolus X-Type 68/73mm bottom bracket for sale. Perfect for your retro DH rebuild to add a touch of old school steez... Cranks are in great used condition, structurally sound with pedal and axle threads plus splines all in great condition. There is shoe rub to the outer edges and faces of both cranks and a few minor scuffs and scrapes. BB bearings are decently smooth 8.5/10 driveside, 7/10 non driveside condition. 170mm crank arm length 4 bolt 104/64 BCD: 2x or 1x chainring set compatible Specifically designed for FR/DH, Super D, Enduro, and DH racing 68/73mm BB shell width Fits Raceface, Shimano, and other external type BBs for Ø24mm spindle 140$ Cash and in-person pick-up/local sale preferred in Vancouver 1st & Commercial, otherwise buyer pays shipping & all PP fees. Call or PM to come by and pick up. Send postal or zip code to get shipping estimate. Thanks for looking.

If the ad is up they're available and saves you asking. Rare Raceface Diabolus DH 165mm silver electro polished cranks and Team DH X-Type 100mm bottom bracket for sale. Perfect for your retro DH rebuild with 100mm bb to add a touch of old school steez...or to make the raddest fat bike around! Cranks are in excellent used condition, there are a few minor scuffs and scrapes. Would benefit from a buff to bring back to full glory. Cranks are structurally sound with pedal and axle threads plus splines all in great condition. Can be 1x or 2x or 1x plus bash guard setup. bb bearings are decent 8/10 condition. 165mm length ***Vintage DH 100mm BB shell width*** Specifically designed for FR/DH, Super D, Enduro, and DH racing 2x or 1x chainring set capability: 4 bolt 104/64 BCD BB fits Raceface, Shimano, and other external type BBs for Ø24mm spindle (does not have bb dust sleeve as shown) 250$ Cash and in-person pick-up/local sale preferred in Vancouver, otherwise buyer pays shipping & all PP fees. Cranks and bb are in Gibsons however I travel into Vancouver often and can meetup if you are serious buyer. Call/text or PM to arrange pick up. Send postal or zip code to get shipping estimate. Thanks for looking.