allanmack

26 inch Mavic EX823 tubeless rim Hope pro 2 150mm x 12mm rear hub, bearings are a little bit rough but still useable SRAM PG970 9 speed cassette in good condition 36 spoke bombproof retro rear wheel runs straight and true

One up bars 800mm width 35mm rise 35mm diameter Barely ridden but some minor scrapes and scratches from fitting and use

27.5 Wheelset Funn Fanton hubs new bearings in rear, front are used but smooth. 110mm x 20mm front 157mm x 12mm rear. DT Swiss EX471 rims, very little use, both straight and true, set up tubeless New Maxxis shorty 2.4 3C maxx grip downhill casing New Maxxis DHR2 2.4 3C maxx grip downhill casing 2 x hope 203mm discs Sram X01 cassette All in good condition

Classic Mountain Cycle Battery Good used condition, some scrapes as to being expected on a bike this age. Perfect little first downhill bike for a smaller rider. I built this up for my 5'1" wife but it's had very little use. She had the seat all the way down and only just fits on it. Everything works well, brakes are good, shifts perfectly. Lots of good parts. Rockshox Boxxer R2C2 forks were serviced by sprung suspension with new lowers and a new leg and have been used very little since. X-Fusion air shock, Renthal Carbon fat bar lite, E-thirteen direct mount adjustable stem, Shimano Saint 4 piston front brake, XT 2 piston rear, Zee cranks 10 speed shifter and rear mech, Mavic D521 rims on hope hubs with good condition Maxxis tyres High roller front DHR2 rear. E-thirteen chain guide, ODI lock on grips and fork bump stops, Charge seat Great little bike

222mm Push tuned dhx5. Needs a service and the reservoir needs replaced as it was dented when I broke the carbon look on my V10. Nearly new cane creek 350x2.75 spring included.

Hope eternity seat post. 27.2mm diameter. 350mm uncut length. Great clamping system. Used but good condition.