amrosen

DT Swiss M1700 wheelset with: - DT350 hubs - Boost spacing - XD driver - 6b brake rotor mounting Hubs have been well maintained and serviced twice per year. Willing to sell front and rear separately. Front: ready to ride Rear: rim has multiple dents/dings and should be considered a rebuild candidate. It still holds tubeless and is currently rideable, but I’d value it mainly as a project wheel or for the DT350 rear hub. Priced for condition. Happy to answer questions or send more photos. OBO.

A take off from a 2025 Trek Top Fuel. Has a single neighborhood ride before swapping down to a SID. Pristine condition. 2025 Pike Ultimate Specs: - 130mm, 29" - 7 1/8" steerer - Charger 3.1 Damper w/ Buttercups - 44mm offset - Star nut installed - Comes with through axle, volume tokens and box if you want it I was planning to pop off the cane creek crown race that I installed but can discuss throwing it in if you have the right headset for it.

Revel Rail 29 Size Medium GX AXS Transmission This bike has 21 miles on it (The wheels and tires only have a neighborhood spin on them). I've had it for a few months and I'm selling it because... I've only put 21 miles on it. I keep trying long travel bikes but think it's time to admit I'm a short travel guy. The highlights: - GX transmission electronic drivetrain. - Rockshox super deluxe ultimate shock and Select+ Zeb fork with the highest-end Charger 3.1 damper. - Crank Brothers wheels with Industry Nine 1/1 hubs. Changes from stock GX transmission build: - new 780mm race face bars (my preferred width) - Rockshox bolt-on Zeb mud guard - clear racer tape frame tape (I can remove if you don't want it but I promise I did a good job) - new WTB volt saddle - new Specialized grips Would prefer local pickup. Please reach out with any questions or offers! Thanks, Aaron

Selling a size medium Blur V4 TR with a custom Rogue Panda Framebag. It was my main bike for the last two seasons but haven't touched it this year so looking for a new home! The details: Frame: Santa Cruz Blur V4 C carbon; size medium Wheels: Reserve 28XC wheels with DTSwiss 240 hubs; lighty used (had 2 wheelsets) Cranks: Sram X1 Carbon 170mm (I also have a new 175mm option for the XC'ers) Drivetrain: XO Cassette (for the weight savings and longevity), GX shifting Tires: Lightly used EXO MaxxTerra Rekon/Rekon Race Dropper: Reverb 150mm Suspension: Fox Performance (I tried the Factory Fit4 damper and went back to the GRIP) Cockpit: Stem and bar (760mm) are stock Atmos Saddle: SDG Radar Grips: ODI Elite Brakes: Level TL; Sram Centerline-X 180mm rotors (Plus 2 fancy Icetech rotors for when these wear out) Frame bag: Custom made Rogue Panda Condition: - Frame is in excellent cosmetic shape—largely protected by ISC Racer Tape, with only a few minor scuffs. - Small, non-structural downtube damage professionally reinforced by Broken Carbon (Repair shop in Boulder, CO). The work is hidden under the downtube guard, carries a 5-year transferable warranty, and full documentation/receipt will be provided. Was reviewed in shop and told it was not necessary but I didn't want to think about it ever again. See attached photo with downtube protector removed! Please reach out with any questions about the build or the frame or other possible parts options! Aaron

Salsa Timberjack (Size M) A custom build we made to keep our stem mounted baby seat off our daily drivers. Ended up putting less than 50 miles on this bike so everything is pretty close to new. Frame: Timberjack Size M Fork: Fox Performance Elite 130mm, 3-position Fit-4 damper Drivetrain: Sram GX Eagle (10-52 tooth cassette, 32 tooth chainring, 170mm installed or 175mm crank arms your choice) Wheels: Raceface Arc 27 rims laced to DTSwiss 370 hubs Tires: Maxxis Rekon 2.4"/DHF 2.5" Brakes: Shimano Deore with 180mm rotors front and rear Stem: 31.8mm x 50mm Raceface Atlas machined stem Handlebar: Marin 31.8mm Dropper post: SDG Tellis 170mm Saddle: SDG Belaire Grips: Ergon GS1 Evo Only moving on from this bike because we went to a full suspension baby trailer (Tout Terrain Singletrailer!) and need more room in the shop. Reach out with any questions!